.303 reloading.

[CINDERS]

Just as a side note from my perspective and not wanting people to take the wrong aspect I do not recommend any load data as to be honest there is that much out there you can pretty much get close to what you need right off the bat and not do the 100's loads most of us have had to do for our rifles. But remember what works in one may not work in another and if you do change something change one only thing at a time. As no use saying this powder s*cks I will change it and the primers together, or change the projies as well and the jump one step at a time and figure what works lots of range time which is not a bad thing. Just make up batches of fives and go up in .2gn increments but remember two important factors;
A) We do not use cordite any more so the barrel harmonics may be different they may not who can say....
B) Todays projies have a better BC that the WWII vintage so trying to emulate the trajectory curve may see you having to go under the 2,440fps but suggest you do range time once your load is settled at 100m and then go over the whole gambit of ranges you shoot and note the sight settings for future reference. The mirage and wind you will have to dope unless you have peeps or original adjustable like on the early MkIII's. There is probably more but best left to the Ammo section as PL said. Have fun

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.