Slow Rust Bluing Recipe

[BushyFromOz]

I would have a look for the following book, Firearm blueing & browning by R H Angier

I saw that in another thread, I ordered the book of evilbay already =D

---------- Post added at 12:43 AM ---------- Previous post was at 12:41 AM ----------

Can you get your hands on 70% Nitric acid and Sulfuric acid?

Sulfuric acid isn't a problem. I'm not sure on nitric acid though. Chemical supply places stock it obviously, but im not sure if its something I will be able to purchase. if anyone on Oz has info on whether is can be brought without special licensing im all ears

2% ammonium chloride would be diluted in destilled water?

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[bigduke6]

2% ammonium chloride would be diluted in destilled water?

Distilled or rain water. I would recommend to test on some scrap steel, try two bits, one highly polished and one sand blasted or similar. As Topfmine describes it is a deep black /blue finish.
Common table salt can be used but gives a brown / black finish IIRC.

The only things I blue now are bayonets ........ all other stuff normally gets blasted and a parkerised/ phosphate finish.

You won't be disappointed in the book.

[BushyFromOz]

Distilled or rain water. I would recommend to test on some scrap steel, try two bits, one highly polished and one sand blasted or similar. As Topfmine describes it is a deep black /blue finish.
Common table salt can be used but gives a brown / black finish IIRC.

The only things I blue now are bayonets ........ all other stuff normally gets blasted and a parkerised/ phosphate finish.

You won't be disappointed in the book.

Thanks very much. I have some old trigger guards and a stuffed Omark barrel that I am going to test on first.

I am working up for a longer term project, I have an 303-25 on a no4 longbranch action that I want to turn into my every day range rifle. I have a lothar walther barrel for it and a nice set of old parker hale sights to go on, I just need to get proficient at the metal finishing before I get into that one

[bigduke6]

Thanks very much. I have some old trigger guards and a stuffed Omark barrel that I am going to test on first.

I am working up for a longer term project, I have an 303-25 on a no4 longbranch action that I want to turn into my every day range rifle. I have a lothar walther barrel for it and a nice set of old parker hale sights to go on, I just need to get proficient at the metal finishing before I get into that one

Sounds an interesting project, keep us posted.

[WarPig1976]

I saw that in another thread, I ordered the book of evilbay already =D

You're half way home then. Take your pick of recipes in that book.