Using the angle finder like the one BAR posted I found the barrel to be over indexed 1.5 degrees. So if my thinking is right I need to bump or rotate the barrel back if that's able to be done. Something else I did was affix the rod and yardstick that was originally used and then cast a bright light from the rear after careful leveling, onto a clean wall in dim light and the mistake was clear as a bell. After going through all this I realized front sight left, back-site right, oversimplifying things I have to make the two meet which equates to, if I'm right and please correct me, barrel to tight by a smidge. Thanks, Brian