-
Legacy Member
Lee Enfield Volley Sight Stock.
Does Anybody know how find one of these or am I out of luck.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
05-24-2017 12:16 AM
# ADS
Friends and Sponsors
-
Contributing Member
Keep your eyes on fleabay is about all I can say go to militaria type Lee Enfield then click worldwide on the left column or go to some gun fairs either way you will have to shell out a pretty penny hopefully it will come with the yardage plate & indicator sight otherwise that's another item that can cost plenty. Good luck
-
-
-
Contributing Member
The sight alone is bringing over $150 consistently on ebay. I've been watching for a P-14 for several years. They go even higher.
-
-
Legacy Member
I have a dial sight plate which is marked E and the graduations are 1500 to __26 can anyone identify this dial sight plate ?
I may have a LES2 dial plate but have to check as I need a dial plate L.E.S. lll for the Mark V1 cartridge
-
-
Contributing Member

Originally Posted by
RCS
I have a dial sight plate which is marked E and the graduations are 1500 to __26 can anyone identify this dial sight plate ?
I may have a LES2 dial plate but have to check as I need a dial plate L.E.S. lll for the Mark V1 cartridge
RCS-- That dial sight plate is made at Eddystone for the P14.
--fjruple
Edit-- The Eddystone manufactured dial sight plates are stamped with an "E" on the front. The Remington "R" and Winchester "W" are stamped on the rear of the dial sight plate which has to be removed from the stock to be identified.
Last edited by fjruple; 05-25-2017 at 12:25 PM.
Reason: Additional information
-
The Following 2 Members Say Thank You to fjruple For This Useful Post:
-
Legacy Member
I think that one of our fellow members was considering making reproductions recently; perhaps he will come forward when he sees this thread?
-
-
Contributing Member
There are reproductions available for the Lee Enfield but not the P-14
-
-
Legacy Member
dial sight plate
I have a dial sight plate on my Mark 1** I P only the stud was machined-off during upgrade to Mark 111 along with a new barrel manufactured in IndiaAttachment 84242
-
-
Legacy Member

Originally Posted by
Aragorn243
There are reproductions available for the Lee Enfield but not the P-14
Where can these be found?
-
-
Advisory Panel

Originally Posted by
WolfGolf96
Where can these be found?
Here's a site that gives you options. 1 Lee Enfield Rifles and Parts -
Apparently this guy has them... SMLE No. 1 MK III Front Volley Sight Assembly Reproduction | eBay
-