303 Brass Web Seperation

[ActionYobbo]

Too many variables for accurate prediction -

• Brass composition
• Brass hardness
• Brass thickness
• Chamber pressure
• Chamber finish
• Presence of lubricant on case or in chamber

Here's one example -


http://www.milsurps.com/images/impor...7/afk9ia-1.jpg

what you are doing there is a very dangerous practice. what you are doing is forcing all the chamber pressure to become bolt thrust. The case under pressure is suppose to stick to the chamber walls but by adding lube to prevent this from happening you are basically firing a proof round every time as the locking lugs are taking all the weight.
Chambers should be clean and dry and cases should be clean and dry.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

you are basically firing a proof round every time

a very dangerous practice.

I agree sir...