"The Flyer"

[RCS]

I have a Remington 40X single shot rifle in 222 Rem cal, I turn the necks to .248 inch to fit the chamber, weigh the brass check the
primer hole, use benchrest primers etc. Most of the time when I get the flyer or two from a small group I change over to another
bullet and work up the loads. Oddly sometimes a flat base bullet will really make a small group

Try some different bullets with the same loading and see if the flyer is still in the group

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.