My combined Quality Hardware rehab thread

[imarangemaster]

Alright I got it. Barrel appears to be the original Rockola with a Itailan FAT star proof in the top of the barrel by the receiver, and the Bolt is a correct round EM=Q. Inland trigger housing, S'G' hammer, Inland trigger housing, Rockola Type 4 slide, SW sear. Trigger looks like "2 3" on it. Completely stripped it down, and replaced the ejector spring, extractor spring, and the recoil spring (which was about 10") with a NOS 10 1/4" USGI. The finish on barrel and receiver are really good, and the bore is crisp with no pitting, I did have the trigger spring fly off into never never land, and did not have a spare. I had to fabricate a temporary replacement fro a Bersa Firestorm magazine spring. It works OK, but I need to find another USGI one.

The overall finish is excellent! Very little slide wear or wear in the receiver channel. Overall, it is the nicest condition carbine I have ever had, with the exception of the correct early Inland I had that was 95%. I will do a daylight picture tomorrow.