P14 stock removal question

**Florey55** · 03-14-2019 08:33 PM

Hi all,

I have a Winchester P14 and would like to remove the stock to do a very light refurb.

Question - how, and with what, do I remove this nut/bolt head?

Attachment 99383

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 03-14-2019 08:33 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**Salt Flat** · 03-14-2019 09:11 PM

Florey, That is the stock reinforcing screw. No need to remove it. Salt Flat

**Florey55** · 03-14-2019 10:05 PM

Originally Posted by Salt Flat

Florey, That is the stock reinforcing screw. No need to remove it. Salt Flat

Oh, I'm glad I asked then.

**Daan Kemp** · 03-15-2019 12:18 AM

If you really want to remove it, buy the correct tool. Or grind the middle out of one of your screwdrivers and make one yourself.

**Promo** · 03-15-2019 08:38 AM

Please do the "refurb" in a non abrasive way, meaning no sand paper or whatever. You'll not only remove wood, but also future value.

Thread: P14 stock removal question

Thread Tools

Search Thread

Display

P14 stock removal question

The Following 2 Members Say Thank You to Salt Flat For This Useful Post:

Similar Threads

Stock Question

French Berthier Bolt Head Check and Extractor Removal Question

Stock bolt leather wad removal

ATI wire stock removal legal?

Stock question

Tags for this Thread

Posting Permissions