-
Legacy Member
Removing Weedon buttstock plug?
Greetings Fellow Enthusiasts,
I want to remove the wooden Weedon plug from the butt of my P14 and replace it with a brass disc - which I already have.
What is the best ( and easiest way ) to remove the Weedon plug? Hopefully some method that does not require drilling the blatsed thing out...
Information
 |
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
03-21-2019 07:02 PM
# ADS
Friends and Sponsors
-
Legacy Member
Florey, I've done this several times. Use a sharp 1/2 inch wide chisel centered on the plug and lined up with the grain of the plug and tap it straight in with a mallet. The plug will split in half and the pieces will fallout with just a little help. They were just glued in and come out pretty easy.
Salt Flat
Last edited by Salt Flat; 03-21-2019 at 09:06 PM.
-
The Following 2 Members Say Thank You to Salt Flat For This Useful Post:
-
-
Legacy Member
Originally Posted by
Salt Flat
Florey, I've done this several times. Use a sharp 1/2 inch wide chisel centered on the plug and lined up with the grain of the plug and tap it straight in with a mallet. The plug will split in half and the pieces will fallout with just a little help. They were just glued in and come out pretty easy.
Salt Flat
Awesome Salt Flat - you are a lifesaver. Thank you very much. Cheers from Sunny Australia
-
Thank You to Florey55 For This Useful Post:
PM
