1898 Headpsace Out of Whack

[skeet1]

If you are a handloader you could always load some fire forming rounds by loading a bullet in the lands of the rifling to hold the case against the bolt face and then fire form. These cases would then be for this rifle only and would require neck sizing only.

Ken

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

to hold the case against the bolt face

Can also be achieved the way .303 guys do it...use a tiny rubber "O" ring around the case at the base. Holds the base against the bolt face and then neck size...