-
Contributing Member
Possible 50 Years Birthday Present
Hello everybody,
today I was talking to a guy who sold me the UTG rail I installed on the STG58, and he suddenly tells me that he's about to put a Springfield 1903 on sale. A friend gave it to him for test and sale and now he is about to sell it, since he's not interested in older stuff.
The guy wants 1000€, which is a very low price for a 1903 here in Italy, either version.
This is a 1903 with the old tangent sights, my favourite, so I asked him if he would be willing to keep it until March, when I'd come and buy it as a present for my 50th birthday.
Maybe he can...
Now to my question.
The pictures are so and so (I will go and check the rifle in the coming days), but does any of you see something odd?
Something not ok on this kind/model?
Thanks in advance for any advice!
Attachment 104391Attachment 104392Attachment 104393Attachment 104394Attachment 104395Attachment 104396Attachment 104397Attachment 104398Attachment 104399
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
34a cp., btg. Susa, 3° rgt. Alpini
-
-
12-18-2019 08:06 AM
# ADS
Friends and Sponsors
-
Legacy Member
Stock was repaired at the area of the rear tang. Could have been a tight fit and cracked the stock while shooting ?
-
The Following 2 Members Say Thank You to RCS For This Useful Post:
-
-
Contributing Member
Stock with pistol grip would be end of the twenties, correct?
34a cp., btg. Susa, 3° rgt. Alpini
-
-
Legacy Member
early stock with pistol grip would have drawing number D-1836 behind pistol grip. WW2 stocks stock has a little different shape to the grip and later
stocks are inletted for both the 1903A1 and 1903A3
-
The Following 2 Members Say Thank You to RCS For This Useful Post:
-
Contributing Member
Three million serial number (3083538) makes it a Remington M1903... early 1942. They didn't come from the factory with full pistol grip stocks. Lot of modification / repair done to that stock.
Last edited by Tom in N.J.; 12-18-2019 at 09:29 AM.
-
-
Contributing Member
Originally Posted by
Tom in N.J.
Lot of modification / repair done to that stock.
Havin' the ever loving bejeesus sanded out of it, for one!
Metal looks pretty nice though. Any loose 1903 stocks floating around in Italy?
-
-
Contributing Member
34a cp., btg. Susa, 3° rgt. Alpini
-
-
Advisory Panel
I wonder if it's a complete parts gun...look at the fit of the rear sight at the barrel ring. That and the pistol grip stock added to the rifle...
-
-
Legacy Member
The butt plate fit isn't right for that price. Fore end seems to be rounded over on the edges from enthusiastic sanding.
Last edited by Daan Kemp; 12-18-2019 at 02:00 PM.
Reason: Add more comments
-
Thank You to Daan Kemp For This Useful Post:
-
Advisory Panel
heavy sanded stock. springfield Mark1 cutoff spindle. Remington 1903, un marked barrel is suspect. buttplate is suspect. I would check the cal, of the rifle, before you fire it, I know 1903s are rare in Italy, however, a well known stock maker is located in Italy and you may be able to get a nice reproduction stock right from them. I would have the cal, and headspace checked before you fire the rifle
-
Thank You to Chuckindenver For This Useful Post: