M1903 barrel change/rear sight base

[phh]

Got it.

Waouh... (eureka, hourra )



Now, unscrew the barrel.... Au gunmith will do

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

unscrew the barrel

So, that can be done with the relief cut you mentioned, then by hand. That barrel's scrap you say. The re-barrel and head space will be a gunsmith job if you don't have the equipment. Don't know if you have lathe either...

[butlersrangers]

Nice job of removing the 'sight-collar' without destroying it!