No4Mk1 maker

[CINDERS]

Missing the cross pin for the rear of the bottom wood they come up as a pair sometimes one fleabay in the UK, that front sight block looks pretty beat up to hell might be worth sourcing a new on whether you can get the same may be an issue but without that front blade bit its just a noisy pike with the bayonet attached.................!!

Some other markings on the rifle ~ N82 Chamber Rt side J.Watts, Sheffield, N78 Front Band Victor Engineering & Sheetmetal Co Manchester, SM Top front fore wood cap Singer Manufacturing, N67 Front sight protectors Singer Manufacturing

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[BEAR]

[QUOTE=CINDERS;469566]Missing the cross pin for the rear of the bottom wood they come up as a pair sometimes one fleabay in the UK, that front sight block looks pretty beat up to hell might be worth sourcing a new on whether you can get the same may be an issue but without that front blade bit its just a noisy pike with the bayonet attached.................!![QUOTE]

You know, when I was photographing this rifle, I noticed the holes for the pin but didn't know if a pin was supposed to be in there. Looked it up on Numrich Gun Parts but didn't see one listed nor shown on the parts diagram. Does the pin just hammer in or is it threaded? I found the front sight and reattached it.
Thanks for the information.

BEAR

---------- Post added at 06:12 PM ---------- Previous post was at 06:08 PM ----------

To all who responded, 30 Three, Roy W, Alan de Enfield and CINDERS......Thank you for your input.

BEAR