Irwin Pedersen and Rock Ola M2 Carbines

[painter777]

TEN,
Here are a few I found in old links here........
Some reported Original, some rebuilds.
Assuming all were as reported as having original barrels.

IP
1,765,xxx with Rock-Ola 2-43
1,777,4xx with UEF 2-43
1,771,6xx with UEF 1-43
1,781,2xx with UEF 8-43
1,772,2xx with UEF 1-43
1,771,58x with Rock Ola 1-43
1,771,99x with Rock-Ola 2-43
1,773,5xx with UEF 1-43
1,773,11X with Rock Ola 3-43 (CMP Auction)
1,776,xxx with Rock Ola 12-42

Here is a list that was posted by long lost member Maniac (Charlie)

IP:
1.76xxxx with Rock-Ola 1/43
1.77xxxx with UEF 1/43
1.771xxx with Rock-Ola (undated)
1.776xxx with Rock-Ola 3/43
1.781090 with UEF 2/43 (GB 09-2009)
1.789775 with UEF 3/43 (GB 1-2010)
1.791979 with 6/43 UEF
3.213xxx with UEF 2/43
3.213xxx with UEF 3/43
3.216xxx with UEF 12/42
3.222568 with UEF 4/43 rblt (CMPicon/GB)
3,216,6xx with UEF 2-43

Maniac had listed these also:

S'G'
1.764xxx with 8/43 UEF
1.766109 9/43 UEF rblt (GB 11-2009)
1.791xxx with 6/43 UEF
1.800xxx with 3/43 Inland
1.815xxx with 4/44 UE
1.822935 with 8-43 UEF rblt
1.823xxx with 9/43 UEF
1.823135 with 8/43 UEF bbl
1.824xxx with 8/43 UEF
1.831xxx with 8/43 Buffalo Arms
1.833636 with 8/43 Buffalo Arms
1.834xxx with 8/43 Buffalo Arms
1.844xxx with 3/43 Rock-Ola
1.856126 with 9/43 UEF rblt (1-10 GB)
1.860xxx with 11/43 IBM
1.8713xx with 9/43 UEF
3.229xxx with 3/43 UEF rblt (1-10 GB)
3.2xxxxx with 4/43 UEF
3.2226xxx with 4/43 UEF
3.233xxx with 12/43 UEF
3.234025 receiver (GB 1-10)
3.2364xx with 6/43 UEF
3.239xxx with 6/43 UEF
3.241xxx with 6/43 UEF rblt
3.244xxx with 6/43 UEF
3.258963 with 3/44 UEF rblt (GA 1-10)
3.554xxx with Saginaw
3.557xxx with 11/43 UEF rblt
3.594509 with 7/43 Buffalo Arms (10-1009 GB)
3.599xxx with 9/43 Buffalo Arms
3.605xxx 11-43 Inland rblt
3.624662 WT with Saginaw rblt
3.635xxx with Saginaw
3.6489xx with 11-43 Inland
3.650947 with 9/43 UEF
3.6xxxxx with Saginaw

SG

3.216757 with Saginaw rblt (GB 11-2008)
3.220xxx with 8/43 UEF
3.298xxx with 10/43 Inland
3.2xxxxx with undated IBM
3.327xxx with UEF 7/43
3.341043 with Saginaw
3.353010 with 1/43 WRA rblt (GB 1-10)
3.353xxx with Saginaw
3.3x4541 with Saginaw (CMP forum Bavarian)
3.35xxxx with Saginaw rblt (GB 11-2008)
3.358xxx with 6/43 UEF
3.364xxx with Saginaw
3,367310 with Saginaw rblt (GB 11-2008)
3.374059 with Saginaw (CMP forum)
3.392327 with Saginaw rblt br (GB 1-10)
3.403xxx with undated IBM
3.404707 with Saginaw rblt (GB 1-2010)
3.405xxx with Saginaw
3.407xxx with Saginaw
3.417xxx with Saginaw
3.429xxx with 4/44 Inland (GB 11-2008)
3.477xxx with Saginaw
3.488766 with 8/44 UEF rblt (GB 1-10)
3.49xxxx with 3/44 UEF
3.513527with Saginaw (CMP forum)
3.516540 5/44 Inland rblt
3.537xxx with Saginaw
3.594xxx with 11/43 Inland
5.851xxx with Saginaw
5.858xxx with 1/44 Inland


About all I can do today,

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[tenOC]

Excellent. It helps. My data probably doesn't mean as much to other people. I only collect complete serials because it's the specific Carbine I'm interested in and not patterns of parts. It's probably a miss on my part but it's what Ive done.

When someone sends me a serial through wufoo I collect what is given and make a note it's a Wuffoo submission so that I protect that info for the owner.