-
Legacy Member
Gil Boyd -L42 serial number 13328
Gil- the above rifle you recently researched for me seems uncommon. It has no M47 or TR on the wrist band and no T on the left side of the receiver.
Is this unusual? I have never seen an authentic L42 with so few markings ? Any thoughts ? Thanks
Sgreg
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
05-27-2020 06:28 PM
# ADS
Friends and Sponsors
-
Legacy Member
You would have been better off posting these questions in the specific Lee-Enfield section of the forum?
-
Thank You to GeeRam For This Useful Post:
-
-
Contributing Member
Sgreg,
Totally agree on trying to obtain the finer details on the makeup of the L42A1 rifle, and what manufacture marks should be on them, is for the Lee Enfield section mate, another expert area to negotiate I'm afraid, welcome to the site.
Good Luck
'Tonight my men and I have been through hell and back again, but the look on your faces when we let you out of the hall - we'd do it all again tomorrow.' Major Chris Keeble's words to Goose Green villagers on 29th May 1982 - 2 PARA
-
-
Do you have more info on this rilfe? Any photo's? The serial number alone suggests it may be an early Maltby rifle, in which case you will not see M47C on it, nor the TR & so forth. Further, a large part of the Maltby markings would be obscured by the front body pad, thus adding to the difficulty in identifying it. But some photo's would really help, preferably with the scope & bracket OFF.
-
Thank You to Roger Payne For This Useful Post:
-
Contributing Member
Serial number seems to indicate a Maltby manufactured rifle. Posting some pics of the rifle would definitely help us sort it out.
*Dah! Roger beat me to it!
-
Thank You to smle addict For This Useful Post:
-
We must have been typing at the same time!
-
-
Legacy Member
Do you have more info on this rilfe? Any photo's? The serial number alone suggests it may be an early Maltby rifle, in which case you will not see M47C on it, nor the TR & so forth. Further, a large part of the Maltby markings would be obscured by the front body pad, thus adding to the difficulty in identifying it. But some photo's would really help, preferably with the scope & bracket OFF.
Are Maltby produced L42s rare ? It also is all beechwood. Just a different bird as compared to the BSA produced rifles. Thanks for the info. Explains everything.
-
-
Any manufacture of 4T, including those converted to L42's other than BSA Shirley rifles are scarce. Only relatively few Maltby, Savage, Long Branch, & Trials rifles, were converted to 4T's, & very few indeed produced at Fazackerley. Add to this that probably a little less than 1100 L42's were produced in total, so it gives you some idea of what you have (assuming we are correct & that it is a Maltby). And yes, when it was originally produced during (probably) 1941 it would have left the Maltby factory dressed in beech woodwork. If its wood never needed changing it will still be stocked in beech......although most of the L42 era wood used in refurbs was also beech.
Hope this helps a little.
-
-
Legacy Member
Any manufacture of 4T, including those converted to L42's other than BSA Shirley rifles are scarce. Only relatively few Maltby, Savage, Long Branch, & Trials rifles, were converted to 4T's, & very few indeed produced at Fazackerley. Add to this that probably a little less than 1100 L42's were produced in total, so it gives you some idea of what you have (assuming we are correct & that it is a Maltby). And yes, when it was originally produced during (probably) 1941 it would have left the Maltby factory dressed in beech woodwork. If its wood never needed changing it will still be stocked in beech......although most of the L42 era wood used in refurbs was also beech.
Hope this helps a little.
awesome information. As they say, you all have forgotten more than I know !! Thanks
-
Thank You to Sgreg For This Useful Post: