-
Contributing Member
Carl Gustafs stads Gevärsfaktori & Waffenfabrik Mauser Oberndorf Mausers
Stopped by the gun store to pick up some rifles and the owner pulled out three Mausers and offered them to me for $400.00 each. The Spanish Carbine rechambered in 308Win was of no interest to me but the Carl Gustafs stads Gevärsfaktori & Waffenfabrik Mauser Oberndorf Mausers did, although I don't know that the 1912 Carl Gustafs stads Gevärsfaktori is worth the price.
Attachment 111547
He's not planning on putting them on the sale shelf for a week or two so I have time to mull them over in m mind... so many other rifles I want to get.. and $400.00 hmmm...
The 1912 Carl Gustafs stads Gevärsfaktori has closet rust in the barrel that is easily heavy and liberal, no pitting from what I could see but lost of surface rust on maybe 15% of the barrel mostly in the first 8 inches from the muzzle, must be more under the wood. I is all matching, no import marks, missing the cleaning rod, bore is clean.
Attachment 111543Attachment 111544Attachment 111545Attachment 111546
The 1988 Waffenfabrik Mauser Oberndorf is super clean more the blue is near perfect. No rust on the blue, a bit on the bolt minor, all matching numbers, clean bore, nothing missing. Does have import marks near the muzzle.
Attachment 111548Attachment 111549Attachment 111550Attachment 111551
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by usabaker; 10-10-2020 at 01:35 AM.
Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
" Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "
-
Thank You to usabaker For This Useful Post:
-
10-10-2020 01:29 AM
# ADS
Friends and Sponsors
-
Advisory Panel
There are so many Swedish
Mausers around in first-class condition that I would not waste a thought on one with a rusty barrel. The Oberndorf-made Mauser is much rarer, and if everything else were the same, that is the one I would go for.
-
-
-
Contributing Member

Originally Posted by
Patrick Chadwick
There are so many
Swedish
Mausers around in first-class condition that I would not waste a thought on one with a rusty barrel. The Oberndorf-made Mauser is much rarer, and if everything else were the same, that is the one I would go for.
I was not really considering the rusted rifle, especlly since there are so many other rifles I would like to have besides it. The Oberndorf does interest me and from what I can tell $400.00 is a decent price. Just don't know if I want it that bad. I've been eyeballing a Winchester model 1890 .22LR project gun that's in need of help, zero blue, that looks like oiled and steelwooled to remove rust, but is all there and functions at $200.00
Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
" Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "
-
-
Advisory Panel

Originally Posted by
usabaker
I've been eyeballing a Winchester model 1890 .22LR project gun that's in need of help, zero blue, that looks like oiled and steel wooled to remove rust, but is all there and functions at $200.00
I'd take that one too. Ammo is easier and cheaper.
-
-
Contributing Member
I'd take that one too. Ammo is easier and cheaper.
She's in really poor condition, and the seller won't flex on the price. But shes is one of the most interesting .22's I've seen in a while; I'd love to get inside her and see how she works.
Attachment 111562Attachment 111561
Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
" Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "
-
-
Advisory Panel

Originally Posted by
usabaker
She's in really poor condition
That's NOT really poor condition Bill, I've worked on far worse. If the bore is OK and doesn't need a liner then you're probably goo. For refinish, I'd bead blast to remove all rust and then paper polish gently until you come up to a 250 grit polish and shine. Then into a hot blue...the wood could just use a scotch brite and Watco oil I think. Once done you won't regret the money as it'll look about new. Lots of small parts but yes, they're a mastery of machining and engineering. I wouldn't sweat the $200...if it were nice it would be LOTS more.
-
-
Contributing Member
That's NOT really poor condition Bill, I've worked on far worse. If the bore is OK and doesn't need a liner then you're probably goo. For refinish, I'd bead blast to remove all rust and then paper polish gently until you come up to a 250 grit polish and shine.
The bore is dirty, closet dust from the looks of it. Making it hard on me Jim LOL.... I was fascinated with the action and feed.
Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
" Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "
-
-
Legacy Member
$200 is a pretty good price on one of those.
Buy it. If you have regrets, someone else will give you $300 for it.
-
-
Advisory Panel

Originally Posted by
usabaker
Making it hard on me

Originally Posted by
rcathey
Buy it. If you have regrets, someone else will give you $300 for it.
I ain't the only one Bill, I'll bet the bore is about perfect, some older ones were ratty but most .22 are good. He's right, I'd take that gun right now without hesitation just for a user.
-
Thank You to browningautorifle For This Useful Post:
-
Legacy Member
The .22 bullets are outside lubricated, meaning rust in the bore can only be from neglect and water, if at all. Probably only dirty with cupboard dust clinging to the lube inside. I'd take the .22 over the larger calibres.
-
Thank You to Daan Kemp For This Useful Post: