+ Reply to Thread
Results 1 to 10 of 10

Thread: K98 Bolt disassembly ring confusion

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member dayichi's Avatar
    Join Date
    Apr 2021
    Last On
    04-27-2021 @ 05:27 PM
    Location
    canada
    Posts
    4
    Real Name
    Dayichi
    Local Date
    10-31-2024
    Local Time
    06:24 PM

    K98 Bolt disassembly ring confusion

    Hi, I just brought this K98icon( all numbers matching) from a private seller. However, it doesn't have Bolt disassembly ring. As I am researching, the late year production did not come with Bolt disassembly ring, but the year of this made was 1938.

    My question is did i get a fake one? though, the all markings are looking pretty real.

    Thanks,

    Michael
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member GeeRam's Avatar
    Join Date
    Apr 2017
    Last On
    09-29-2024 @ 11:20 AM
    Location
    Berkshire, UK
    Posts
    875
    Local Date
    11-01-2024
    Local Time
    12:24 AM
    Yep, not the original stock, that's a very late war or a post war stock.
    Sight hood as well, but could have been modified during service for the later sight hood to be fitted.

    Gonna need many more photo's of all the markings to see if its a genuine matching numbers that has been fitted with a different stock, or a complete fake numbered rifle.
    Just the thing for putting round holes in square heads.

  4. Thank You to GeeRam For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member dayichi's Avatar
    Join Date
    Apr 2021
    Last On
    04-27-2021 @ 05:27 PM
    Location
    canada
    Posts
    4
    Real Name
    Dayichi
    Local Date
    10-31-2024
    Local Time
    06:24 PM
    Thread Starter
    here you go. I wonder why they put 1938 on it? just by looking, this 1938 mark looks so real. what kind of tool did they use to put it on? or it is from original factory ?

  7. #4
    Legacy Member dayichi's Avatar
    Join Date
    Apr 2021
    Last On
    04-27-2021 @ 05:27 PM
    Location
    canada
    Posts
    4
    Real Name
    Dayichi
    Local Date
    10-31-2024
    Local Time
    06:24 PM
    Thread Starter
    Attachment 116866[ATTACH][ATTACH][ATTACH]Attachment 116869[/ATTACH][/ATTACH][/ATTACH]

  8. #5
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    10-26-2024 @ 01:39 PM
    Location
    Desert Hot Springs, California
    Posts
    1,085
    Real Name
    Walt Meyer
    Local Date
    10-31-2024
    Local Time
    06:24 PM
    Definitely suspicious. The late-war stock on a pre-war action with a matching number on the stock doesn't make sense. Additionally, the electro-penciled "54" on the safety flip switch doesn't look correct. The gun looks to be in beautiful condition which indicates to me someone refurbished it.

  9. #6
    Legacy Member dayichi's Avatar
    Join Date
    Apr 2021
    Last On
    04-27-2021 @ 05:27 PM
    Location
    canada
    Posts
    4
    Real Name
    Dayichi
    Local Date
    10-31-2024
    Local Time
    06:24 PM
    Thread Starter
    Thank you.

    what is the fair value on this gun?

  10. #7
    Legacy Member Eaglelord17's Avatar
    Join Date
    Aug 2014
    Last On
    Yesterday @ 04:21 AM
    Location
    Sault Ste. Marie, ON
    Posts
    1,262
    Real Name
    A.N.
    Local Date
    10-31-2024
    Local Time
    07:24 PM
    Just a point as well as I am not a Mauser expert, it maybe all matching just all matching for a post war nation (such as East Germanyicon, etc.) where they may have refurbished it with a late war stock/post war stock. It most definitely isn't factory matching though, which is a very rare state to find. Sorry I can't be much more assistance, I tend to avoid things like K98ks as there is so much to know and so much to fake.

  11. #8
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    10-26-2024 @ 01:39 PM
    Location
    Desert Hot Springs, California
    Posts
    1,085
    Real Name
    Walt Meyer
    Local Date
    10-31-2024
    Local Time
    06:24 PM
    I concur with Eaglelord, but I too am not an expert on Mausers (but I did sleep at a Holiday Inn once). Give your post a couple of more days and the true Mauser experts will check in and give you better advice.

  12. #9
    Legacy Member Wthenley's Avatar
    Join Date
    Apr 2021
    Last On
    05-18-2022 @ 08:00 PM
    Location
    Alabama
    Posts
    39
    Real Name
    travis
    Local Date
    10-31-2024
    Local Time
    06:24 PM
    I would have to say the 1938 mark is original to the rifle. The thing that doesn't match in my mind is the stock...as was stated the receiver and wood are from two different time periods, or so it seems. The safety is marked similar to a RC rifle which i have never seen on a non RC gun. Its been a while since I dug deep into the Germanicon mausers so Im a little rusty on the details myself. It reminds me of a Mitchell's. I would say the stock is 1944 or later having no takedown disc.
    Last edited by Wthenley; 04-25-2021 at 10:30 AM.

  13. #10
    Legacy Member GeeRam's Avatar
    Join Date
    Apr 2017
    Last On
    09-29-2024 @ 11:20 AM
    Location
    Berkshire, UK
    Posts
    875
    Local Date
    11-01-2024
    Local Time
    12:24 AM
    Quote Originally Posted by Wthenley View Post
    I would have to say the 1938 mark is original to the rifle. The thing that doesn't match in my mind is the stock...as was stated the receiver and wood are from two different time periods, or so it seems. The safety is marked similar to a RC rifle which i have never seen on a non RC gun. Its been a while since I dug deep into the German mausers so Im a little rusty on the details myself. It reminds me of a Mitchell's. I would say the stock is 1944 or later having no takedown disc.
    The Erma factor code S/27, 1938 and the serial number on left side of receiver are original, but, I would say everything else has probably been forced matched to that number. The numbers on the bolt look forced matched, and don't look like the numbers on an original 1938 Erma rifle bolt.
    Without seeing the all other numbered parts (need more photos of all the other numbered parts) its still not easy to be precise, but it loos like a forced match bubba job I'm afraid, and as said, the stock is not original to a '38 dated Erma rifle, being a 1945 onwards stock. Can't see from the photos if the barrel is original or not.

    ---------- Post added at 04:53 PM ---------- Previous post was at 04:48 PM ----------

    Quote Originally Posted by Eaglelord17 View Post
    Just a point as well as I am not a Mauser expert, it maybe all matching just all matching for a post war nation (such as East Germany, etc.) where they may have refurbished it with a late war stock/post war stock.
    Yes, it could be something like that, there should be stamps to indicate that, but it would need much better photos, and one of the K98kicon experts to identify if its a post war Czechicon, East German etc rebuild rifle, but I have no knowledge at all of this post war rebuild stuff.
    Just the thing for putting round holes in square heads.

+ Reply to Thread

Similar Threads

  1. SKS bolt disassembly help!
    By bigchunk1 in forum Soviet Bloc Rifles
    Replies: 7
    Last Post: 02-27-2015, 12:24 PM
  2. Bolt Disassembly
    By musketjon in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 15
    Last Post: 09-07-2014, 12:56 AM
  3. 1905 Bolt disassembly
    By tinbirdrod in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 03-24-2010, 02:53 AM
  4. M1 Bolt disassembly tool
    By Vinegar Joe in forum M1 Garand/M14/M1A Rifles
    Replies: 10
    Last Post: 09-14-2009, 07:46 PM
  5. Bolt disassembly ?
    By Shake Rag in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 3
    Last Post: 04-02-2009, 10:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts