Been a few weeks. Barrel shortened about 1.25 inches and recrowned. There is no notch cut in feed ramp. two position bolt release. Stock stripped, sanded(lightly) and received about 12 coats of tung oil. Got a 45 weaver base which is very close for contour on receiver ring. Put a 48 weaver base on rear bridge, mount way too high for front so milled rear base down little by little until straight edge showed same elevation as front base. Rifle already drilled and tapped for weaver bases so nothing lost. Got to fill rear dovetail some donkey added and file/ emery down to original contour.
Found an old weaver K4 in excellent shape(need a long scope tube for ring spacing) will mount in weaver grand slams(medium).
When mounted will post pics. Bore is excellent so should shoot well.