-
Advisory Panel
I don't see a welded rivet on the tie plate Rob. It just looks normal to me. Maybe the light in the photo makes it sort of look that way. Guessing the round impression around the head of the rivet on the plate is from the mandrel it's held on while the other side is staked.
-
-
04-21-2024 12:05 PM
# ADS
Friends and Sponsors
-
Advisory Panel
I don't see a welded rivet on the tie plate Rob. It just looks normal to me. Maybe the light in the photo makes it sort of look that way. Guessing the round impression around the head of the rivet on the plate is from the mandrel it's held on while the other side is staked.
On taking another look Brian I think you're probably right: I was reading too much into the colour and the "ring" around the end of the rivet probably raised by too hard a die strike, which resembles a spot weld somewhat.
“There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”
Edward Bernays, 1928
Much changes, much remains the same. 
-
-
PM
Originally Posted by 
