+ Reply to Thread
Results 1 to 5 of 5

Thread: M17 Life Guestimation - right track?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member baconslayer's Avatar
    Join Date
    Jan 2024
    Last On
    04-21-2025 @ 11:08 AM
    Location
    Georgia, USA
    Posts
    37
    Local Date
    04-25-2025
    Local Time
    06:21 AM

    M17 Life Guestimation - right track?

    Hi all, This weekend I picked up a bubba'd M1917 Eddystone. After some initial research I wanted to put forth a guestimation of its life. Bubba mods= cut down stock, retains both sights.

    The serial number refers to an April 1918 rifle manufacture.

    The barrel is dated 12-17 ; W for Winchester.

    Bolt is mix of R, E and W.

    The barrel and action are parkerized in a well done black/dark grey.

    The bore measures .3005 at the muzzle with erosion tool gauge.

    Markings: Left side: AAB, AABG, RA ; H by mag well ; Square P and Fancy P behind Trigger guard

    further research: AA= Augusta Arsenal used 2, 3, 4, and 5 letters. Examples include but are not limited to AA, AN, AAL, AAM, AAR, AOY, and AAHO.

    My assumption:
    Made in 1917 - did some sort of service WWI era, Training, etc...
    Put in storage
    Pulled out in WWII
    Determined damaged bore / barrel, replaced with the Winchester then parkerized
    Sold to public, bubba'd and rarely shot

    Thoughts? I am mostly questioning the arsenal install of W barrel and parkerization.

    Thanks!
    Last edited by baconslayer; 04-07-2025 at 01:12 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Yesterday @ 08:45 PM
    Location
    long island, ny
    Posts
    694
    Real Name
    Bill
    Local Date
    04-25-2025
    Local Time
    06:21 AM
    Don't sell it short with "some kind of service". That rifle was undoubtedly in the AEF's hands by summer 1918 and saw some serious service. Remember Belleau Wood was summer 1918 and the Meuse-Argonne was a little later in the year. The war continued until 11/11/18 with action even on that very day.

    In WWII it probably never left the states. It was most likely used at a camp gate, guarding a telephone or western union exchange building, guarding docks on either coast or one of the thousands of railroad bridges throughout the country. It was referb'd to serve in WWII and probably sold out of service after that.

    If you want to learn a good deal about your rifles production I suggest you look up The Story of Eddystone on the Remington Society website. It's free and extremely informative.

  4. The Following 3 Members Say Thank You to oldfoneguy For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member baconslayer's Avatar
    Join Date
    Jan 2024
    Last On
    04-21-2025 @ 11:08 AM
    Location
    Georgia, USA
    Posts
    37
    Local Date
    04-25-2025
    Local Time
    06:21 AM
    Thread Starter
    Quote Originally Posted by oldfoneguy View Post
    Don't sell it short with "some kind of service". That rifle was undoubtedly in the AEF's hands by summer 1918 and saw some serious service. Remember Belleau Wood was summer 1918 and the Meuse-Argonne was a little later in the year. The war continued until 11/11/18 with action even on that very day.
    Did not mean to sell it short, for all I know it could have been issued to my G-Grand father who served in Franceicon with the AEF with the Army Signal Corps.

    Thanks, I will check out the Remington Eddystone site.

  7. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 11:28 PM
    Location
    Victoria BC
    Posts
    30,993
    Real Name
    Jim
    Local Date
    04-25-2025
    Local Time
    03:21 AM
    My past father in law was issued an M1917 while he was employed as driver in Fredericton NB and quartered at the experimental farm on the old Lincoln road. That one would have probably seen Canadianicon acceptance marks though. So they even saw their turn here.
    Regards, Jim

  8. The Following 2 Members Say Thank You to browningautorifle For This Useful Post:


  9. #5
    Legacy Member FremansFarm's Avatar
    Join Date
    Jun 2021
    Last On
    04-17-2025 @ 05:14 AM
    Location
    Pensacola, FL
    Posts
    14
    Real Name
    gunter jdson
    Local Date
    04-25-2025
    Local Time
    05:21 AM
    Should be easy to drop in a 1917 stock. The CMPicon custom shop detected a cracked receiver on my Danishicon import Eddystone. It had an excellent stock. No problem finding a doner similar to yours on GB.

+ Reply to Thread

Similar Threads

  1. Please help me track a birthdate on my FN Mauser
    By cprher in forum Mauser Rifles
    Replies: 3
    Last Post: 05-09-2013, 12:02 PM
  2. Please help me track the history of these guns
    By WiCK3D_SiX in forum Military Shotguns
    Replies: 2
    Last Post: 06-12-2012, 10:48 PM
  3. Need Help, slide jumping track
    By Milwroad in forum M1/M2 Carbine
    Replies: 18
    Last Post: 04-29-2011, 10:47 PM
  4. 1915 1911 value guestimation?
    By stryker in forum 1911/1911A1 Service Pistol
    Replies: 2
    Last Post: 04-05-2011, 11:52 AM
  5. Way Off Track But Of Interest
    By Jughead in forum M1 Garand/M14/M1A Rifles
    Replies: 13
    Last Post: 12-11-2009, 09:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts