Late production Rem 03.

[m1903rifle]

Stamped parts were definitely used on the last Remington M1903 rifles , but I am not sure at what serial number they started. The serial number of your rifle and pictures would be of help to the forum experts

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[nashorn]

Hi, That is what I thought. The serial number is 33649xx and it has a RA 1-43 barrell on it. Cannot post pics at this time but is is a very nice action. Any other help would be greatly appreciated. I can get all the correct milled "R" marked parts except the milled trigger guard and all the correct stamped parts. I just need to know which way to go.

[John Beard]

Hi, That is what I thought. The serial number is 33649xx and it has a RA 1-43 barrell on it. Cannot post pics at this time but is is a very nice action. Any other help would be greatly appreciated. I can get all the correct milled "R" marked parts except the milled trigger guard and all the correct stamped parts. I just need to know which way to go.

Rick is correct. Your real late Remington '03 would have stamped parts to include:

Trigger guard
Buttplate
Butt swivel
Magazine Follower
Lower band & swivel
Lower band retaining spring

The stock would be an '03-A3 style. The upper band would be milled.

All Remington rifles from beginning of production were identified as "modified". Poyer is misinformed.

Hope this helps.

J.B.