Polytech and Norinco "M14"

[Sarge]

99% of the bad comments you hear about the chicom M14/S rifles is PURE BULL SH--!!! Much of this garbage is dumped on the internet by 2 or 3 people/companies who want to convince you that your rifle isn't safe and you should pay them $700 or some such ridiculous amount to convert it to all GI parts.
There has NEVER been a report of a major malfunction on these rifle in the 10+ years I've been on the internet. The same cannot be said for ANY of the other brands of the M1A rifles. I have read reports of major problems with everyone of the "American" made rifles!
I know of several guys that have 10,000 rds thru original, unmodified chicoms.
One who rents machine guns has a chicom M14 sekect fire rifle with 30,000 rds thru an unmodified rifle.
Yes the rear sights on some early ones are bad and there were problems with soft bolts on the early rifles. All of those problems were corrected in later imports which were also then made in the US inch pattern so that all but 2 small parts are interchangeable with GI parts. One is the locking collar for the gas cyl, can't remember the other one.
I am the Happy owner of unmodified chiciom M14/S and an M14 select fire rifles.
Sarge

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Snafu]

I shot 3 K of cheap surplus through mine
Then I had it turned up
USGI Bolt/trigger group/Flash hider/rear sight
All the above very reasonable for the CMP about 150 bucks
Douglas barrel
Freds stock
NM work by Roland Beaver

Below is me playing @ 600 with no pits
It will do better