Sticking expander/decap assembly

[jmoore]

The problem is that the die manufacturers don't know how thick the case necks will be (up to a point) , so they made the sizing die suitable for sizing the THINNEST possible neck thickess down to a size that will adequately hold the projectile. The expander ball's function is to size up the thicker case neck ID's to a point where the bullet won't be distorted upon seating.

If you want to minimize cold work on your cases get the Redding type "S" dies that have changable case neck sizing inserts. I still run a ball in conjuction w/ these just to round things up in case of dents and such, but the cases are worked less, stretch less, last longer, and produce most excellent accuracy (in those rifles that will achieve sub 2/3 MOA or so the difference is particularly noticable).

It just depends on what you're trying to achieve whether its worth the small expense and extra effort involved.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[USSR]

If you want to minimize cold work on your cases get the Redding type "S" dies that have changable case neck sizing inserts. I still run a ball in conjuction w/ these just to round things up in case of dents and such, but the cases are worked less, stretch less, last longer, and produce most excellent accuracy (in those rifles that will achieve sub 2/3 MOA or so the difference is particularly noticable).

I've got the Redding Competition Die Set which uses the bushings. Best thing since sliced bread. With various size bushings, I am able to vary the amount of neck tension desired with different makes of brass. I handle the "roundness of neck" thing by inserting a knife sharpener (long cylindrical tapered rod) and giving it a tap to remove any dents in the case neck. Decapping is handled by a Lyman Universal Decapping Die.

Don