What "should" this look like

**terryj** · 12-21-2009 04:40 PM

I'm trying to find out what this gun looked like when it was built. I'm thinking of taking it back to original.

Cheers
Terry

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 12-21-2009 04:40 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**Badger** · 12-21-2009 04:50 PM

Hi Terry ...

... and welcome ...

Although the rifle in the link below was manufactured by BSA, not LSA, it's essentially correct enough for you to see what's changed in your rifle, which has been "sporterized" at sometime in its life ...

1917 ShtLE (Short Lee-Enfield) No.1 MkIII* (click here)

I've also moved your thread to the Lee Enfield Collectors Forums where you'll probably get a broader response ...

Hope this helps ...

Regards,
Badger

**terryj** · 12-21-2009 04:56 PM

Thank you Badger.

**jmoore** · 12-22-2009 12:41 AM

Looks do-able! It will need a complete fore end assembly, but that shouldn't be difficult. If the bore is in good shape have at it!

**Amatikulu** · 12-22-2009 06:28 AM

In 1917 LSA was still making the No.1 Mark III and not the No.1 Mark III* as you can see from the picture of your butt socket.

I would expect a restoration to have a magazine cut-off and a windage adjustable rear sight. A Mark III would also have a forestock inletted for a front and rear volley sight set, but I'm unsure if LSA made a hybrid Mark III later in WWI which excluded them - comments?

**Amatikulu** · 12-22-2009 06:30 AM

On closer examination of your pictures it would sem the barrel was replaced in 1927 so the chances are that the windage adjustable sight was dropped but the magazine cut-of was retained at that time.

**Pattern14** · 12-22-2009 07:49 AM

Originally Posted by Amatikulu

I would expect a restoration to have a magazine cut-off and a windage adjustable rear sight. A Mark III would also have a forestock inletted for a front and rear volley sight set, but I'm unsure if LSA made a hybrid Mark III later in WWI which excluded them - comments?

Amatikulu,
I have a 1916 LSA Mk III that has the mag cutoff and original windage rear sight but sports a non-inletted stock that is numbered to the rifle. Seemed strange to me that it would have had the stock updated without the sight replaced and cutoff removed.

Regards,
George

**bradtx** · 12-22-2009 08:54 AM

George, Has the back sight been 'pinned', preventing adjustment?

terryj, LSA rifles have a bit of mystique to them and have been a collector's favorite for years, well worth recovering to original configuration. As, Amitikulu, mentioned the rifle recieved inter war attention. A fore end without provision for volley sights, but clearanced for the cut-off would have been installed along with a non windage adjustable back sight.

Merry Christmas, Brad

**Pattern14** · 12-22-2009 09:09 AM

Originally Posted by bradtx

George, Has the back sight been 'pinned', preventing adjustment?

Bradtx,
No, the backsight is not pinned and functions normally. Actually, the only pinned backsights I have seen were on the Indian .303's converted to shotguns.

Regards,
George

**terryj** · 12-22-2009 04:31 PM

Thanks for the replies, I'm learning a lot.(the wife shakes her head at me at 2am while I'm scanning the net) Does anyone have any idea where to get these parts?
Is it worth replacing the rear sight back, it shoots right on the money now, although it would give me an excuse to shoot it more.

Cheers and stay safe over the holiday season.
All the best to you and yours.

Thread: What "should" this look like

Thread Tools

Search Thread

Display

What "should" this look like

Thank You to Amatikulu For This Useful Post:

Thank You to Amatikulu For This Useful Post:

Posting Permissions