+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: What to Do With My Daddy's Arisaka Bringback

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Haoleboy's Avatar
    Join Date
    Oct 2020
    Last On
    11-01-2020 @ 03:52 AM
    Location
    Honolulu, Hawaii
    Posts
    4
    Local Date
    10-31-2024
    Local Time
    01:53 PM

    What to Do With My Daddy's Arisaka Bringback

    I have a war souvenir Arisakaicon Model 38 my Dad brought back from Guam. It is missing the bayonet, the cleaning rod and 1 receiver screw. Unfortunately due to a family dispute the rifle was left lying around exposed to the air and picked up some rust. With the exception of the items mentioned above it appears complete including Chrysanthemum. I would like to go after the rust a little, touch-up the bluing and clean up the wood furniture BUT I would hate to destroy its value in so doing. What is you all's thoughts on this matter? Thanks in advance- Haoleboy greeting you from Hawaii.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 06:59 PM
    Location
    Victoria BC
    Posts
    30,402
    Real Name
    Jim
    Local Date
    10-31-2024
    Local Time
    04:53 PM
    You're going to get the phonebook on this one... Many times it's been hashed out here. I use fine steel wool, 0000 fine and rifle oil and it takes off rust without removing blue.

    Pics of it's condition would help here, very close clear pics. Also the missing parts can be had...
    Regards, Jim

  4. Thank You to browningautorifle For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,846
    Local Date
    10-31-2024
    Local Time
    04:53 PM
    Quote Originally Posted by Haoleboy View Post
    I have a war souvenir Arisakaicon Model 38 my Dad brought back from Guam. It is missing the bayonet, the cleaning rod and 1 receiver screw. Unfortunately due to a family dispute the rifle was left lying around exposed to the air and picked up some rust. With the exception of the items mentioned above it appears complete including Chrysanthemum. I would like to go after the rust a little, touch-up the bluing and clean up the wood furniture BUT I would hate to destroy its value in so doing. What is you all's thoughts on this matter? Thanks in advance- Haoleboy greeting you from Hawaii.
    Do not sand or steel wool the woodwork, just rub it down with linseed oilicon. Otherwise I guarantee you will "destroy its value" to some extent.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  7. #4
    Legacy Member Haoleboy's Avatar
    Join Date
    Oct 2020
    Last On
    11-01-2020 @ 03:52 AM
    Location
    Honolulu, Hawaii
    Posts
    4
    Local Date
    10-31-2024
    Local Time
    01:53 PM
    Thread Starter
    Thanks Jim, I'll try and get some pix up. Worst is the first barrel band with the bayonet lug and out to muzzle. Appreciate the help.

    ---------- Post added at 07:12 AM ---------- Previous post was at 07:07 AM ----------

    Thanks for advice, told Jim above I'll try and get some pictures up.

  8. #5
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    10-26-2024 @ 01:39 PM
    Location
    Desert Hot Springs, California
    Posts
    1,085
    Real Name
    Walt Meyer
    Local Date
    10-31-2024
    Local Time
    06:53 PM
    For the rust, 0000 steel wool and LOTS of oil.....For the wood, just a wipe down with some raw linseed oilicon on a rag then wipe off the residual with a clean cloth (no BLOicon).....don't touch the bluing, leave it as is other than removing the rust and cleaning it with Hoppes solvent and a protective coat of oil.....lastly, don't take it apart.....you should do well on the sale since this is a good time for sellers!

  9. #6
    Contributing Member usabaker's Avatar
    Join Date
    May 2017
    Last On
    10-29-2024 @ 10:07 PM
    Location
    San Deigo, CA
    Posts
    1,771
    Real Name
    Bill Baker
    Local Date
    10-31-2024
    Local Time
    04:53 PM
    Quote Originally Posted by Haoleboy View Post
    Model 38 my Dad brought back from Guam
    Would you happen to know what outfit your Dad was with? My grandfather was in the NCB 59 and was in the first echelon in the liberation of GUAM. He landed with the 1st Provisional Marine Brigade and The US Army 77th Infantry Division near Agat to the south on White Beach One (Dati Beach).
    Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
    " Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "

  10. #7
    Legacy Member Haoleboy's Avatar
    Join Date
    Oct 2020
    Last On
    11-01-2020 @ 03:52 AM
    Location
    Honolulu, Hawaii
    Posts
    4
    Local Date
    10-31-2024
    Local Time
    01:53 PM
    Thread Starter
    My Dad was a Communications Officer (or in the Comm Dept) on a subtender USS Sperry AS-12 as a very junior officer. I guess they made a port call there or were stationed there after the hostilities had wrapped up, he said the weapons were more or less lying around at the time so he bagged a couple. My uncle (Mom's brother) was a Marine in the Tarawa amphibious assault and others.

    ---------- Post added at 11:52 PM ---------- Previous post was at 11:48 PM ----------

    Not really planning to sell at this time, the weapon has sentimental value. I just want to clean it up without destroying its value. So far 0000 steel wool and oil seem to make it look a whole lot better. I did break it down but it came apart cleanly and should go back nicely.

  11. Thank You to Haoleboy For This Useful Post:


  12. #8
    Contributing Member fjruple's Avatar
    Join Date
    Dec 2006
    Last On
    Today @ 04:04 PM
    Location
    New Jersey, USA
    Posts
    1,046
    Real Name
    Franklin Ruple
    Local Date
    10-31-2024
    Local Time
    07:53 PM
    Be careful sanding the wood as the varnish the Japaneseicon used was from a tree in the Poison Oak family and you can get a reaction from the dust of the varnish.

  13. #9
    Contributing Member Singer B's Avatar
    Join Date
    Aug 2019
    Last On
    10-26-2024 @ 01:39 PM
    Location
    Desert Hot Springs, California
    Posts
    1,085
    Real Name
    Walt Meyer
    Local Date
    10-31-2024
    Local Time
    06:53 PM
    Don't sand the wood!! Fjruple is correct and even worse it will destroy the historical and financial value of the rifle.

  14. #10
    Legacy Member mike radford's Avatar
    Join Date
    Mar 2009
    Last On
    08-12-2021 @ 04:50 PM
    Posts
    165
    Local Date
    10-31-2024
    Local Time
    07:53 PM
    Do not mess with the wood outside wiping it with a paper towel or at most a wipe with Ballistol.

    The metal, bronze wool, or very fine steel wool lubed with lots of Kroil Oil. Soak it with Kroil first, for days. The Japaneseicon rifles tolerate 0000 steel wool better than any I have tried it on. Go slow, light and keep it wet and wiped away frequently. Bonze wool is safer they say.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. My very first G 43 is coming home to daddy tomorrow.
    By daytonlawvol in forum Milsurps General Discussion Forum
    Replies: 10
    Last Post: 02-17-2017, 06:16 PM
  2. For Father’s Day; The twins needed a NEW DADDY !
    By fn111557 in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 06-18-2014, 02:22 PM
  3. Happy Birthday Big Daddy
    By Badger in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 02-04-2011, 12:00 AM
  4. Daddy do day, SARCOS!
    By sdh1911 in forum Soviet Bloc Rifles
    Replies: 0
    Last Post: 07-31-2010, 07:37 PM
  5. Happy Birthday Big Daddy
    By Badger in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 02-04-2010, 12:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts