-
Contributing Member
High Wood Stock Value
Are M1s with high wood stocks more rare/valuable than M1s with low wood stocks? I'm looking at a 1943 Inland, high wood with oval cut, type 2 barrel band, Inland barrel, flat bolt, adjustable rear sight, push button safety, no visible cartouche on stock other than the circle P on the grip. Sorry, no pictures since it is in a gun store that doesn't allow them. Thanks for your help!
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
03-03-2020 11:29 PM
# ADS
Friends and Sponsors
-
Legacy Member
Condition always applies to both the action and the stock. All things being equal, high-wood stocks demand a premium. It may also depend on whether-or-not the right stock is on the right action. If the stock is mounted on a carbine that supposedly left the factory that way, it may enhance the value of the package.
Last edited by floydthecat; 03-04-2020 at 06:44 AM.
-
-
-
Contributing Member
The stock is marked "OI" in the sling slot. Both the metal and the wood are in pretty good shape. I didnt see a cartouche on the right side and that, along with the adjustable sight but no flip safety or bayonet lug worry me a little bit.
-
-
Legacy Member
Carbine stocks like all other parts on a carbine are serial number dependent. An Inland with a type 2 barrel band and an adjustable rear sight can go together as well as the push button safety all in a type 2 stock. The flat bolt is questionable but possible. All depending on serial number range. The stock being apparently sanded does not bode well for being original as it left the factory.
-
-
Contributing Member
That's what I was thinking. Serial # is 831,xxx. They are only asking $600.
-
-
Legacy Member
That's the low end, so look for a reason it's on the low end. Look for a discoloration on the receiver from welding, especially easy to see on the left side. Look at the gas port for cracking around the piston nut of the barrel. Look for a cracked trigger lug on the rear. All that is easy to check once its out of the stock.
Also look at the stock for extraneous stamps from a rebuild process wherein they would add U, RA-P, P, circle P, CSAA, RSAA, BA, OG MR, etc. somewhere to the stock. Bavarian held stocks will have about 4 digits stamped in the left side cut out which matched the last four of the serial number of the action that was in the stock. That renders it less valuable.
Sometimes there's just a good price on the Carbine and you get a good deal. TO some people six hundred is still a lot of money when you can buy a lever action 336 or Savage bolt action for 350 retail.
-
-
Contributing Member
Excellent advice, thanks!
-
-
Legacy Member
That seems way too early for a type 2 band. I would think from that that the band might well be a cut off type 3. Also something you need to check out.
When they tell you to behave, they always forget to specify whether to behave well or badly!
-
The Following 3 Members Say Thank You to jimb16 For This Useful Post:
-
Legacy Member
On an 831xxx, one would expect to see type two highwood stock, flat bolt, type one barrel band and a mix of slides and hammers. It could also have an SG receiver. I have had so many 6 digit Inland carbines that I think that's the only GI M1 carbine ever produced.
-
The Following 3 Members Say Thank You to deldriver For This Useful Post:
-
Legacy Member
I was talking about the T2 BARREL BAND, not a T2 stock.
When they tell you to behave, they always forget to specify whether to behave well or badly!
-