Hi guys,

I am attempting to improve the trigger pull on my 1903A3 and I am stumped as to what to do next.

This is what I have done: I replaced the sear spring and I carefully stoned the sear and the trigger contacts smooth. I polished the pins and the contact points on the receiver. I cleaned and lightly coated the parts with BreakFree before re-assembly.

The good: The second stage has a nice clean break now.

The bad: The first stage still has a heavy, halting, and mushy pull to the second stage.

I know what the trigger is suppose to feel like because my 1903 Springfield has a light and even pulling first stage that stops at the second and then breaks cleanly and crisply @ 3 3/4 pounds.

Does anyone have any suggestions as to what I might do next?

Thank you in advance for your help.

Steve
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.