-
Contributing Member
Patrick, Range 100 yards, original sights and yes from a sandbag.
Regards Ulrich
Nothing is impossible until you've tried it !
-
-
03-11-2011 04:49 PM
# ADS
Friends and Sponsors
-
Advisory Panel
With original sights, that is very good!
The 3-in-1 hole suggests to me that it would be even better if you could attach a 'scope - possibly sub-1MOA. At the moment, you are probably "eyeball-limited"
Last edited by Patrick Chadwick; 03-11-2011 at 05:59 PM.
-
-
-
Contributing Member
Thank you Patrick!
Yes, thinking about a scope is my idea too. But i want to have the original mount and the scope and thats not easy to find because this stuff is mostly selled with the ZFK`s and spare parts are very rare.
Regards Ulrich
Nothing is impossible until you've tried it !
-
-
Advisory Panel
Originally Posted by
gunner
the original mount and the scope
Ulrich, your purse is obviously better filled than mine. My Swiss
is a G96/11, and I am slowly getting round to the idea of a home-cooked composite milled/molded attachment. Unless, of course, you can tell me about a scope bracket for the G96/11 with a 2-figure price! (It's my youthful optimism that keeps me going!)
Patrick
Last edited by Patrick Chadwick; 03-12-2011 at 04:26 AM.
-
-
Contributing Member
Originally Posted by
Patrick Chadwick
Ulrich, your purse is obviously better filled than mine. My
Swiss is a G96/11, and I am slowly getting round to the idea of a home-cooked composite milled/molded attachment. Unless, of course, you can tell me about a scope bracket for the G96/11 with a 2-figure price! (It's my youthful optimism that keeps me going!)
Patrick
Patrick, thats the problem! My purse isn´t better filled and i have to save my money for the things i want to have. But if there is a chance to get the original parts at someday i´ll save the money. You´ll have the same problem than i have. For the G11 is no really good scope mount to have except you let i make, which is expensive! Other solutions are to use the S&K mounts which are not bad, but you need a scope for a long eye relief. Or you solder the mounts on the rifle, and thats not my way to destroy rifles in such a way. I´ve never seen a usable scope mounts for the G96/11 or the G11.
Regards Ulrich
Nothing is impossible until you've tried it !
-
-
Advisory Panel
Originally Posted by
gunner
you solder the mounts on the rifle, and thats not my way to destroy rifles in such a way.
That is out of the question. I do not wish to make any irreversible alterations. So I need a clamp-on solution. And I haven't found it yet.
Patrick
-
PM
