Inglis High Power Serial Number - I'm stumped

[lawrence_n]

Long Branch had a rifle team, I don't know if they had a pistol team. I'd agree on the "lunch box" special or, if they had a pistol team, a piece selected and tuned for those shooters. My brother bought a lovely 7.62 No.4 with a one-of-a-kind target rear sight. There are no military or DCRA stamps on the rifle, but from the condition and little clues on the rifle as well as some research, we've concluded that it was probably made for the rifle team. If only the pistol could talk!

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Paul S.]

"If only the pistol could talk." Indeed, and what a tale it would tell.

There are logical, deductive reasons to expect that it was not selected and tuned for pistol team use. Firstly, there is the simple matter of wartime demand for pistols which would seemingly preclude holding back pistols for competitive target shooting. Remember too, that at private citizens across "the Empire" had not long before (circa 1940) handed over personal weapons for war service use. Secondly, it is unlikely in the least (more likely unimaginable) to expect that a specially selected pistol, taken from the assembly line would have what appears to be a hand stamped serial number when it would have been easier, less labour-intensive and time consuming to pantograph a serial number on it in the same way it would have been otherwise.

Sadly, we can only guess what the real story is here, and that is a story all of us would really like to hear.

[Peter Laidler]

'.....If only the pistol could talk.....' In circumstances like an un-numbered pistol, sometimes it's better if if it didn't talk!

[Horilka]

Here another lunch box special, №1 Mk1 as I understand. Very clean example, escaped from serializing and cutting the slot for stock.

[Tom E Gun]

That is an interesting pistol Horilka.
Do you know any of its history? I am specifically curious about how and why it was refinished. Was it originally in the white, or were some parts mismatched and then refinished? I have not seen that combination of some polished blued parts (i.e.: grip screws, rear sight, hammer, magazine, etc) and some sandblasted (i.e.: slide & frame) before. I am also curious if the slide was filed to remove serial numbers, perhaps to match a lunch box -unnumbered - frame, since the right side serrations appear to have flat tops rather than sharp edges (or is that just an optical illusion cause by by monitor?).
Cheers
TEG

ps: Here is a picture of my 5T, the serrations appear much sharper and the original tooling marks look rather crude at this magnification:

[Horilka]

It looks like mine was definitely refinished. It's hard to tell why - maybe stolen parts were in white or maybe somebody decided "to improve" the old finish. I don't see any sign of serial number removal in any of three areas, but serials on Inglis HPs are so shallow and easy to remove if you have some skills and equipment. But again, it's easy to cover serial removal on slide and frame, but the barrel surface looks like it never had any serial.

[browningautorifle]

barrel surface looks like it never had any serial

We had barrels come in to service as replacement that had no serial of course...

[Peter Laidler]

I would disagree that it's easy to hide or cover a serial number on the frame/slide because contrary to what you say, Inglis (and Sterlings) were cut fairly deep. So deep in fact that to file and linish one out of the frame or slide would be easily detected with a micrometer and/or a steel rule/straightedge.

Because the engraving was fairly deep, in UK Military service a miscellaneous instruction was issued to the effect that we were not permitted to re-engrave a serial number over a linished out number on a barrel (being re-used in another pistol for example.....). It could be left blank or numbered with an electric pencil, otherwise known as a 'scratchy pen'. Later this was amended so that while re-engraving was not permitted, workshops with the correct facilities could re-number with what was called a 'drag diamond' which marks but doesn't cut. (Well, I suppose it does, but it is really a deep 'scratch')

Feel free to correct me Tankie and BAR as I recall stamping was absolutely taboo of course!)

[browningautorifle]

The diamond etch seems about right, as in engraving with a pantograph... The weapons shop in Wainwright had one I remember. We were so far removed and had so many lodgers that we needed almost full facility.