Hi all, I have an issue with my trigger on my No4T and having read Peters trigger pull off threads I'm still unsure of a way forward. When I start to take up the 1st stage it feels graunchy, it's as if there 2 stages within the 1st stage ( pressure, trigger moves, then stops, a slight increase in pressure required to continue to 2nd stage). Then I get a positive stop to which the 2nd stage starts with a crisp release to the fired position. What I have noticed is, during the squeeze of the 1st stage I can see the cocking piece move rearward by about 14 thou, so not only is the sear nose moving down the cocking bent, it's pushing it back I reckon. I don't think this is normal but I could be wrong.
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.