Newbie with Winchester ??

[DaveHH]

That type 2 barrel band is worth about $200 right there. People get on the excitement plan when seeing Winchester.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Jim__W]

I see there is a Winchester with mixed parts on GunBroker right now with holes drilled in it for same scope mount same as mine.
http://www.gunbroker.com/item/644003255

Will be interesting to see how it sells. Don't know that I will ever sell this one but kind of interested to know what they are worth. Some day my wife or kids will have to figure out what to do with all the "stuff" I've amassed over the years so I like to keep a list with approximate value.

[painter777]

Haven't seen how much wood was cut away inside the stock for the scope mounts, but know Frank D @ the Stock Sick Bay could make it look right.....

And the more I look at the holes on the side of the receiver I can't help but think how much nicer it would look with those plugged. Plugged and touched up with some Brownells oxpho creme.

Rather small investment to make a already nice carbine look better.

Just some thoughts.........

Charlie-Painter777

[Jim__W]

Thanks Charlie,
I'll try to get some better pictures of the stock. The hols should be easy to plug but the wood working would have to be by someone with a lot more skill than me. How do I get in touch with
Frank D ?

[browningautorifle]

How do I get in touch with
Frank D ?

Message him with a PM...or he'll be along.

[painter777]

Calling Frank Derrico.........

Just like that JW...

I put that WRA on GB on my watch list.
I'll say over $825, that seller is about 1 hour SW of me.

Cheers,
CH-P777

[painter777]

I put that WRA on GB on my watch list.
I'll say over $825,

Missed it,
Sold for $730
Might have pulled more if they'd ID'd the internal parts.

CH-P777

[tenOC]

I think I paid $700 2 yrs ago for a Win with scope holes, but had an unmarked dogleg in it.

[Jim__W]

Here is a close up of the stock where it was cut out to clear the scope mount. Does anyone know of someone in the Phoenix area who would be qualified to repair this?
I am going to plug the holes in the receiver and get the stock repaired.

I had am uncle who did this sort of wood work many years ago but sadly, he is no longer with us. My wood working skills are best saved for rougher work.

Jim

[painter777]

I sent FD a PM about an hour ago with a link here.
I believe Frank is in Wisconsin.......... Packers fan

Charlie-P777

P.S. Jim_W See what that GB WRA is up to? ;-)