-
Your rear cross pin seems to be missing it's tab, Beginner. Makes disassembly a bit more difficult, yes? If you were to shoot it a great deal, it might want to walk out of position, as the tab rotates into and is restrained by a small slot in the receiver.
May be able to get one here, if they ship overseas, which I don't think they do on orders over US$100, maybe not at all:
http://www.gunpartscorp.com/catalog/...510&catid=2934
Otherwise, it's looking very good!
Last edited by jmoore; 07-02-2011 at 07:42 AM.
-
-
07-02-2011 07:31 AM
# ADS
Friends and Sponsors
-
Legacy Member
Originally Posted by
jmoore
Your rear cross pin seems to be missing it's tab, Beginner. Makes disassembly a bit more difficult, yes? If you were to shoot it a great deal, it might want to walk out of position, as the tab rotates into and is restrained by a small slot in the receiver.
May be able to get one here, if they ship overseas, which I don't think they do on orders over US$100, maybe not at all:
http://www.gunpartscorp.com/catalog/...510&catid=2934
Otherwise, it's looking very good!
Thanks! And the tab is there, it just isn't very visible when it is in the locked position.
-
-
-
Originally Posted by
Beginner
Thanks! And the tab is there, it just isn't very visible when it is in the locked position.
Oops! My fault for not bringing out the magnifying lens! "Ah sees ee-ut nawuh!"
-
-
FREE MEMBER
NO Posting or PM's Allowed
I also wish you the best in your marrage. I've been there 49 years with the same wife. If it hadn't been for her I would probably not made it past 60. And I am certain you will enjoy the Johnson. I have one of the early ones (no letter prefix) that I have shot a bunch of 30-06 through. Most of the rounds have been hand loads but a many have been LC M2 ball. I did replace the original barrel since it was fairly shot out but had the Dutch acceptance mark so it had to be saved and the wood which was so dry it frequently split when fired was also replaced. It had some previous owner name spelled out on the batt stock with the point of a 30-06. My latest efforts have been to get a 7mm barrel I bought recently where it will shoot a reasonable group. At this time using some Norma hunting ammo it could be beaten by a 12 guage.
-
Legacy Member
-
-
Legacy Member
Sorry, resurrecting a very old thread but I finally got around to checking the bolt hold open issue. And the problem is quite clear: the bolt does not travel back far enough. The buffer runs out of space before the hold open is engaged. How is this even possible?
And I am 100% sure this is the issue; when I take the "link" (=the long rod that travels inside the buffer tube) out of the plunger-cup and retract bolt all the way back the bolt hold open works fine without problems. I even measured the missing distance that the bolt should have to move for the catch to engage and it is around 4 mm which is around 5/32" I suppose.
Is there a simple way of taking the buffer tube out and having a look if there is something wrong with it? How does the buffer tube come out?
I am stumped by this, and seems like a weird issue. Thanks!
-
-
Legacy Member
Pop over to here :
Sign In - Johnson Rifle Site Bulletin Board
The one you need to contact is Joesph Scott . He sells a very detailed viedo of the take down of a Johnson. He can also help with your problems and has a stock of parts. He has had some eye health problems , so he is running behind , but if you register and leave a post or PM for him he'll contact you through his local library's computer ( he's had power / computer problems too. ) .
Chris
-
Thank You to emmagee1917 For This Useful Post:
-
Legacy Member
Originally Posted by
emmagee1917
Pop over to here :
Sign In - Johnson Rifle Site Bulletin Board
The one you need to contact is Joesph Scott . He sells a very detailed viedo of the take down of a Johnson. He can also help with your problems and has a stock of parts. He has had some eye health problems , so he is running behind , but if you register and leave a post or PM for him he'll contact you through his local library's computer ( he's had power / computer problems too. ) .
Chris
Thank you for the advice, but alas I am in Scandinavia and hence can not get any parts from the US unfortunately. Ordering parts from overseas is a PITA, and not even worth the hassle. But I will post my question there!
-
-
Legacy Member
Good choice Beginner! If I should ever stumble across an M41 for 2K € I would hit it like a ....well I would buy it straight away!!!! Don't forget to post more pics!!!!!
-
-
Legacy Member
-
The Following 3 Members Say Thank You to Beginner For This Useful Post: