-
FREE MEMBER
NO Posting or PM's Allowed
I think your going about it the right way ! There's a M2 Plainefield 10 minutes from my house @ $5400. but from what I have read those were cast receivers and not as solid as the GI 's, so the ability to move from host to host is the way to go. I do have other NFA toys and a trust as well so something in state would be an easy transfer. My buddy just got paper work back on 2 MG's that he sent in back in Feb 2012. Best Chris
Originally Posted by
3154tm
carwashchris,
it just transferred to my dealer and since i don't have a trust my paper work is at my CLEO waiting for his signature. usually takes about a week to 10 days and then off to ATF. right now i understand that's about 9 mos to 1 year. you need to have patience if your into NFA toys.
this is a registered trigger housing and is supposed to come with everything i need to convert an
M1 to M2 spec. including stock, slide, bolt, selector, etc.
frank
-
11-28-2013 08:47 AM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
i looked at a Plainfield and a very nice Ivor Johnson and passed for the same reason. also looked at a couple of nice original M2's and decided i didn't want to be the guy that trashed a valuable piece of history by putting thousands of rounds through it like my Mac's.
this will be my 5th stamp and the waiting never seems to get any easier. there are pros and cons to having a trust. i was mostly to cheap but also worried that atf was going to make life more difficult for people with trusts. now with E-file i wish i had. supposedly, wait times are much reduced.
frank
-
-
Advisory Panel
Our paperwork in Canada seems to take forever too right now. I'm waiting to do a trade and the paperwork is "Forthcoming" with no ETA...at least you guys can transfer an FA for some good times...
I'd end up going broke, buy a supressed M3 and then feed it...it'd cost me a mortgage...
-
-
FREE MEMBER
NO Posting or PM's Allowed
Dec. 9th is the big day, if Obama signs the pending bill my Trust will still need the CELO to sign, he already does NOT do suppressors if political pressures get high for him, I could see him snubbing everyone, that's why the Plainfield was so attractive it is close and I could still get it sent in in time. We must think alike, who wouldn't want to own an original M2 but I'd hate to be the guy that ruined it. Chris
Originally Posted by
3154tm
i looked at a Plainfield and a very nice Ivor Johnson and passed for the same reason. also looked at a couple of nice original M2's and decided i didn't want to be the guy that trashed a valuable piece of history by putting thousands of rounds through it like my Mac's.
this will be my 5th stamp and the waiting never seems to get any easier. there are pros and cons to having a trust. i was mostly to cheap but also worried that atf was going to make life more difficult for people with trusts. now with E-file i wish i had. supposedly, wait times are much reduced.
frank
-
FREE MEMBER
NO Posting or PM's Allowed
There is no "bill" pending for Obama to sign. It's a proposed change in regulation. To learn about the Federal rulemaking process see
https://www.federalregister.gov/uplo...ng_process.pdf
December 9th concludes opportunity for public comment on the proposed rule change.
http://www.atf.gov/sites/default/fil...r-firearms.pdf
See page 49 for info on submitting comments. Be sure to tell Ms Friend what you think of 41P if you haven't done so already.
-
FREE MEMBER
NO Posting or PM's Allowed
My Bad, your correct ! I have been to both sites and weighed in, hopefully it will expire and go away !
Originally Posted by
CrossedCannons
-
FREE MEMBER
NO Posting or PM's Allowed
picked up my new (to me) carbine. i hope to use this gun as a host for my M2 trigger group when ever ATF lets me have it. the receiver is Inland serial # 6.246 and the barrel is also inland 2/44. the front sight is stamped with a P and the rear sight is I.R.CO. (capital "O" ?) 6160060. the cut out in the stock for the sling is either HI or IH with no other external markings that i can see. the barrel band is marked KI and the bolt is flat. that's all i can see until i can disassemble it. any suggestions as to what i should look for?
Last edited by 3154tm; 12-15-2013 at 04:12 PM.
-
Just jumping in without reading the whole post.
Curious if you might already have some M2 internals.
Like the correct late style Trigger Housing, or a modified to M2 TH?
Might find a Inland M2 Op slide and sear already installed.
Charlie-Painter777
Pic of a SG modified to M2 style slide
---------- Post added at 04:24 PM ---------- Previous post was at 04:21 PM ----------
P.S.
Your P frt sight is a WWII replacement.
The HI stands for Hillerich & Bradsby, made for Late Inlands. Stock is often called a 'potbelly'
HTH,
Charlie-Painter777
-
-
FREE MEMBER
NO Posting or PM's Allowed
charlie, thanks for the info. the M2 trigger housing/group and the M2 spec slide and bolt that came with it are hopefully all i'll need for the conversion.
-
FREE MEMBER
NO Posting or PM's Allowed
just an update to this old thread. i finally got my stamp back, the paper work went in the mail box to ATF 12/03/13 and the stamp arrived 7/14/14. i guess the xtra man power in the NFA divison of ATF is starting to pay off. now it's time to start building my M1 to M2 specs and see how she runs!