Parker Hale M82 Serial number check.

[Gil Boyd]

Yes correct Ron, amazing price, but someone saw the true value...................... and agreed revert to C3A1 if the barrel speaks its history!!

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Steve1152]

Finally got my M82 R21221 from the seller in Germany. I sent a number of photographs to Ron for his assessement of my rifle. This is as follows:

Here are my comments based on your pictures:

P1. Serial number and proofs are correct for M82/C3
P2. "308 proof" appears to be German and not applicable to M82/C3 - most likely an import requirement
P3. "A/B" date stamp - 1976 - Very exciting as this the C3 production date
P4. Front steel base correct for M82/C3. Can't make out the stamp on the barrel That is a letter C
P5. 7.62 Nato M83/C3 correct
P6. Rear steel base correct for M82/C3
P7. Bolt should be black oxide. Is the underside of the knob flat?
P8 Can read Number in barrel channel
P9 "15" is a rack number

The barrel action is M82 and on Charnwood's list. Orginally it was a C3. The stock is not correct. It's a M82 with an Anschutz front rail.

With a correct stock and Kahles ZF scope you would have a C3 - very rare - very valuable.

As you can imagine I was really excited to get Ron's assessment and I do now own a C3, well most of one. Special thanks to Ron for taking the time to review the pictures of my C3 and responding in detail.

I didn't manage to get the pictures in the same sequence as Ron's comments, but you will get the idea!

Steve

[desperatedan]

Hi Gil, do you anything showing in your records for s/n 00114G please?

[Gil Boyd]

Kev,
Yes this rifle features in entry 1969 in the register for the C3A1 part of the 1200TX/M82 Canadian Refurbishment Contract W8466-7EHB17/01 DATED 26-11-87 No further information.
Gil

[desperatedan]

Kev,
Yes this rifle features in entry 1969 in the register for the C3A1 part of the 1200TX/M82 Canadian Refurbishment Contract W8466-7EHB17/01 DATED 26-11-87 No further information.
Gil

Thanks Gil. Unfortunately I don't have a lead on the rifle but my reason for asking is that in response to a WTB request for M82 stock spacers I removed the spacers from my M82 to compare sizes with some others I had. One of the spacers on my M82 has that number on it and it looked to me like a serial number. I wonder if it was originally fitted to a C3A1 as IIRC they had wooden stocks when first supplied by PH to Canada? Shown on left in pic below.

Cheers, Kev
Attachment 115682

[Gil Boyd]

Kev,
I woukl say it was from that rifle, only because it took them three years to convert and restamp these 500 rifles its the way I would have done business to ensure each rifle got its personal service, as I know they did by those that did the conversions.

[Molonlave]

Looking for a serial number check on PH 1200TX

R-52920

Thank!

[Gil Boyd]

Sadly nothing logged in the register with that number.

[rgg_7]

00114G is a good C3a1 serial number. This spacer was against the stock butt face as you can see the impression of the spacer retainer. Spacers were marked both in pencil and marker, some stamped as well. Can you show us a picture of the barrel channel (top view) - can tell you whether you have a C3 or C3a1 stock.

Ron (Canada)

---------- Post added at 05:25 PM ---------- Previous post was at 05:22 PM ----------

R-52920 is outside the C3 serial range. Most likely a single shot 1200TX. Might make a good clone.

Ron (Canada)

[Molonlave]

Thanks for the info gents!