-
FREE MEMBER
NO Posting or PM's Allowed
SPRINGFIELD Drawing # and Serial info...
I saw the post here and figured I'd try to find out about my old springfield.
My Receiver Drawing Number is: D28291 32 & above that is stamped: 0 6 2 C triangle FF
My Receiver Serial Number is: 2506247.
I know it has a new old stock barrel SA dated 2-55, and a new Boyd Walnut Stock. The other numbers I can see without more than a field strip are as fallows;
Bolt: D28287-1 W.R.A.
Trigger Housing: D28290-14-SA
Hammer: C46008-9 SA
Safety: C46015-9 SA
I guess my question is what do I really have here & do the Receiver numbers look like they should? Apart from the non SA Bolt, it looks good, but after reading about the welded receivers on the internet, I wanted to ask. Thanks...
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
02-17-2012 05:47 AM
# ADS
Friends and Sponsors
-
Legacy Member
I have a SA 2.4 million and a 2.7 million and both receivers are revision 32
-
Thank You to RCS For This Useful Post:
-
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks, I was worried that nobody else had that revision, I've seen lower revision numbers in that serial range. Also I dont know what the ( 0 6 2 C triangle FF) means yet, thats stamped above the drawing number. Maybe someone here knows and will pass it on to me.
-
FREE MEMBER
NO Posting or PM's Allowed
hillbilly,
recevier---1/44
bolt--3/44----6/45
trigger housing-7/44 or12-44
saftey--8/42--8/43
can not find that heat lot # on reciver,my book says it should be--059 <>
---charles
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks, thats good info for me to keep handy on my rifle. Sorry about the Heat Lot ?? I don't know of any other stamps on it in that location. If I roll it around a bit more forward of the heat lot code, where that sideways FF is stamped, just around on the small thin front of that Lug looks like: V V or something, hard to make it out, i don't think its a W because it seems so well struck, but nothing connecting it in the middle to form anything exept maybe the V V. Not sure what the WW and V V mean either, I guess an inspectors stamp from somewhere.
Anybody got any ideas? Thanks.
-
FREE MEMBER
NO Posting or PM's Allowed
I got more pics added today on my photo page, now you can see some better up close pics. I couldn't get a good focus on the sights like I wanted, but the pro's on this site should be able to tell what type I have. If not, let me know, I'll keep trying to get metter pics if I need to. Thanks for all your help so far.