-
FREE MEMBER
NO Posting or PM's Allowed
Need help on elevation drum on a M1 garand
The tab on the inside of the elevation drum has worn down and rear sight will not hold. marks are NHC. What do I do. witch maker makes the the best for that?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
07-18-2010 11:34 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Unless you can find someone to replace the drum on the pinion, you will have to buy the pinion w/drum. I assume you have tried tightening the windage screw.
-
-
Legacy Member
Almost every M-1 I have needs to have the windage screw tightened up from time to time. You should ALWAYS do this before a match. If you can adjust the sight without too much effort, and cannot depress the sight by putting your thumb on the aperture and pressing down with say 5-10 lbs. force, you are good to go. If it will not hold you will have to follow Devil Dog's advice.
-
-
FREE MEMBER
NO Posting or PM's Allowed
I have tried tightening the windage screw and it will not hold elevation
-
FREE MEMBER
NO Posting or PM's Allowed
You can find good used ones for $20-25 .
-
FREE MEMBER
NO Posting or PM's Allowed
![Quote](images/tacticalgamer/misc/quote_icon.png)
Originally Posted by
bdouthet
The tab on the inside of the elevation drum has worn down and rear sight will not hold. marks are NHC. What do I do. witch maker makes the the best for that?
If you find the replacement drum, I have the tools to change it out. let me know