+ Reply to Thread
Results 1 to 5 of 5

Thread: 1898 Krag Questions

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Bubba's friend's Avatar
    Join Date
    Aug 2010
    Last On
    12-23-2018 @ 10:30 AM
    Location
    Roanoke, VA
    Posts
    11
    Local Date
    10-31-2024
    Local Time
    05:59 PM

    1898 Krag Questions

    Bought a Kragicon at auction several years ago.

    Seems to be in pretty good shape but I have a few questions.
    Serial number puts it at a birth date of 1901. There's also a date of 1901 and some fancy script initials stamped in the stock on the left side, and two marks on stock behind the trigger guard on the grip one being a U ans the other appears to be maybe two characters or symbols that I just cannot identify.. Also, I found a three piece cleaning rod under the trap in the shiny(but not plated) butt plate.

    Seems to be pretty much original to my untrained eye.

    I have fired a few rounds and cannot figure out the case ejection system. Extraction is perfect and there seems to be a small lever that pivots up when the bolt is fully retracted. However, the case is not tossed out of the action like I would expect. Anyone have an idea or comment?

    I have wondered about the finish on the stock, anyone know what was used? It's dark and very smooth, not sticky or gummy. No real blemishes other that some dings in the wood. No brush marks either.

    Value guess?

    couple of pics.





    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Bubba's friend; 08-18-2010 at 05:34 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member andiarisaka's Avatar
    Join Date
    Dec 2008
    Last On
    02-22-2024 @ 04:00 PM
    Location
    Upper Appalachia aka SE Ohio
    Posts
    343
    Local Date
    10-31-2024
    Local Time
    05:59 PM
    One of the marks behind the triggerguard is a script p in a circle, it's the firing proof, sometimes a rifle will have more than one. Any other letters or numbers there are either the stock fitter's mark, or the mark of the fellow that did the proof firing. As far as ejection goes, sounds like you're babying the bolt, there's no spring, so the quicker you bring it back, the quicker that little lever comes up to eject the empty. Don't worry, it'll stop when it gets all the way back without harming anything. So you're bubba's friend, well he's my cousin, so I ought to know you! Oh, the finish, boiled linseed oilicon, it dries, isn't gummy. Sometimes it's cosmolineicon that the stock has absorbed over the years too, I have one that must be 5lbs heavier than my others from absorbed cosmoline. It has so much oil in it the cartouche stands proud of the stock!
    Last edited by andiarisaka; 08-19-2010 at 06:01 AM.

  4. Thank You to andiarisaka For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member jon_norstog's Avatar
    Join Date
    Mar 2009
    Last On
    11-01-2021 @ 12:41 AM
    Location
    Portland, Oregon
    Age
    79
    Posts
    582
    Local Date
    10-31-2024
    Local Time
    03:59 PM
    'sFriend,

    I am not the best person to give you a value on your rifle, but I am getting a sense of things Kragicon in the market. First, it surprises me how much they are worth! Therefore, prepare to be surprised. Your rifle looks original and correct, so I'm assuming it is. I would guess $900-1000, add another 50 or 100 for the cleaning rod, add same if it has a decent bore. If you can document the rifle, tie it to a unit or an individual, that would add a lot.

    It's too young to have served in the Spanish American War, but could have been in the Phillipines, China, or maybe even Mexico. ANd it is a good-looking rifle.

    Too bad they can't talk!

    jn
    Last edited by jon_norstog; 08-20-2010 at 12:42 AM.

  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Bubba's friend's Avatar
    Join Date
    Aug 2010
    Last On
    12-23-2018 @ 10:30 AM
    Location
    Roanoke, VA
    Posts
    11
    Local Date
    10-31-2024
    Local Time
    05:59 PM
    Thread Starter
    Jon & andiarisaka

    Thanks for both of your responses to my questions.

    They have been very helpful. Perhaps I'm lucky that this particular rifle did not see active duty in the war. I suspect that it would have had some rough treatment and I actually prefer the condition that this particular is in from many that I have seen.

    Did a search on the cleaning rod that's in the butt. Wow, I think I got a bonus with this one, clean, smooth, no rust and no pits. The bore is bright, shiny and has well defined rifling. One of these days I will probably take it out for a little exercise at the range.

    Thanks again for your responses.

    jeff

    ps. my friend Bubba lives in North Carolina. We used to shoot together before I retired and moved to the mountains

  8. #5
    Legacy Member Griff Murphey's Avatar
    Join Date
    Mar 2009
    Last On
    05-28-2020 @ 12:07 PM
    Location
    Texas
    Posts
    282
    Local Date
    10-31-2024
    Local Time
    05:59 PM
    Your stock - in fact the entire rifle - looks just like my "sewerpipe" 98. My rifle was purchased at Deep River Armory in Houston in about 1967.

+ Reply to Thread

Similar Threads

  1. 1898 Krag rifle...
    By coneten in forum Krag Rifles
    Replies: 6
    Last Post: 03-14-2010, 03:50 PM
  2. 1898 krag handguard
    By kwc271 in forum Krag Rifles
    Replies: 5
    Last Post: 02-12-2010, 10:21 AM
  3. My 1898 Krag - Is It A True Carbine?
    By David Wile in forum Krag Rifles
    Replies: 23
    Last Post: 12-11-2009, 05:24 PM
  4. 1898 (1901) Krag
    By c&rfan in forum Krag Rifles
    Replies: 6
    Last Post: 08-22-2009, 08:48 PM
  5. 1898 Krag
    By tinbender in forum Krag Rifles
    Replies: 21
    Last Post: 05-31-2009, 11:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts