-
FREE MEMBER
NO Posting or PM's Allowed
Problem with svt-40 need HELP
I have a SVT40 and its acting strange. I'v cleaned it up seriously, the gas system work prefectly, the ejection is good, BUT... If I put one single bullet in the magazine and shoot it everyhting works great, altough if i put more than one bullets, say 2, it would either slam fire or EVEN detonate the first bullet upon closure of the bolt! Kinda scary... I use CCI primers, and I reload...Using 42 gr of 4895 and 150gr Hornady bullets. But that's hardly the problem since its occuring upon closure of the bolt. Anyone can help? If i close the bolt with only one bullet in the magazine there's no problem at all...
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
08-14-2011 04:59 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Are the primers deep enough? As the bolt slides forward the firing pin probably dimples the primer, like on a Garand. At least it's a place to start.
-