-
Advisory Panel
No wonder we are losing the battle....
Last edited by Amatikulu; 01-02-2011 at 08:25 AM.
-
-
12-27-2010 03:15 PM
# ADS
Friends and Sponsors
-
Legacy Member
It would be nice to get some old soldiers on the forum and see which rifle they would have rather had during the service years, I'd hazard a guess at the Lee Enfield 99% of the time. I also expect many other rifles that went out of CHS were DPd or scrapped, at least a well maintained LE could last a hundred years plus.
-
-
-
Deceased
I'm an old soldier sailor and I strongly prefer the FAL. If I was issued an SKS, I'd say thank you. I engaged in no close combat. Just like efficient rifles. Gary
-
Everytime I see another concern about headspace and the Lee Enfield, I try to point people towards this excellent explanation of headspace in the Lee Enfield, so that people have an understanding of their concern. It's listed here in Knowledge Library:
Headspace 101 for .303's
Last edited by Badger; 12-28-2010 at 07:17 AM.
Reason: Fixed link to be descriptive ...
-
-
Legacy Member
I saw that thread, read that response and was quite angry. It also perpetuates some people's ideas that these rifles are old, useless, junk. As for making the comparison to the Mosin Nagant.... I will just say this... I have never once had an Enfield with a bolt that was hard to open after firing but I have had several Mosin Nagants and Mausers that took a rubber mallet to open the bolt due to fouling after firing a few rounds. The looser tolerances on an Enfield are there for a reason.
Last edited by Amatikulu; 01-02-2011 at 08:26 AM.
-
-
Legacy Member
Didn't even need a link...just read Son's post and knew exactly where to look.
Some things never change.
Last edited by Amatikulu; 01-02-2011 at 08:27 AM.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Huh? Seems like a well versed individual would understand. I'm just glad I am able to change headspace with a new bolthead and not have to spend a wallet full of money to have the barrel set back.
-
Advisory Panel
It's all right guys, another poster has come along and said this.... (BTW, the sticky he referenced tells all about how the Lee Enfield chambers are all machined out of round- )
The fallacy of just changing the bolt head is just that, a Fairy Tale. While sometimes it may work, most of the time it wont.* The reason being is each armorer had their idea just what is to be set on their rifles under their control. I have a manual written in 1924 for the Armorers serving for Great Britten. These men had to be experts on just about every fire arm you could think of. Experts, not handy men.
In the margin of this manual ,written in pencil, as if it was verbatim as the instructor recited it, is " The head spacing on the Enfield Rifle shall be such that the soldier may store a dry pair of socks!"
Many,many of the bolt bodies have been shortened.(You think of the Armorer have boxes of spare bolt heads just lying around. In real life they must not have had them. Or were out of the ones needed. )
Grab your calipers and measure what you have. If you have more than one rifle, you will see what I mean. Bolt bodies vary in length from rifle to rifle.
Many of the members here from a few years ago jumped onto the band wagon when the rifles came into the USA by the thousands. Members were having cases fail at the web more often than not.
I started to do inspections on the rifles in my collection and in gun stores. I found excessive head spacing on about 98% of the rifles checked.(read sticky) Measurements were from "normal" to way out of spects.
Britt military brass can and will stand this "slop". Our brass will not. Many cases will look as the photos show, or will have insipid case head separation on the first reloading.
I have one NoIV MkI barreled receiver that is so bad, it cannot be made safe to shoot. The head spacing was so "loose" that the bolt pounded the locking lugs until the excessive head spacing is more than 17 thousands of an inch.
The rest of my rifles have had the bolt bodies replaced to like new length, and with a "0" or number "1" bolt head. While the head spacing is now back to safe specifications, the shape of the chamber, shoulder position, roundness of the chamber, centering of the bore to the center of the chamber and condition of the chambers throat due to the corrosive effects of thousands of Cordite rounds fired are still major factors.
The size of the bore can cause pressure indicators of the fired primers that will mislead you to the wrong conclusions. Many of the old rifles will have bores larger than .314. Only an over-sized cast lead bullet would obdurate properly.
There is a very good chance you can safely shoot your rifle/s. Read the sticky, try the "repairs" listed. You may be pleasantly surprised how well you can get your rifle to shoot.
* many of the bolt heads have been filed or machined down from what they are stamped or the Number assigned to them. If your trying to head space the SMLE, the bolt head has to be "miked" as to its real size.
Do the masking tape test. Its easy, is accurate, and will save you time and money in the long run.
Attachment 18422 Attachment 18422 Attachment 18422
Just a quick comment about one glaringly obvious point... Where this person says "many many of the bolt bodies have been shortened..." lets just think about this... If you shorten the bolt body, the bolt head will no longer come against the shoulder of the bolt body at the point of bolt closing (the spec is maximum of 15deg overturn to contact the face of the bolt body IIRC)- It will, however still be in exactly the same place with regards to length (it is held here by the thread) until you fire it a few times with the threads being the only thing transfering the chamber pressure (recoil) onto the bolt body to the locking lugs. I haven't tried it, but I'd imagine the headspace would go out of spec quite quickly, stuffing the threads!
PLEASE If anyone hears or sees or reads or gets told something that doesn't quite seem right- come here and ask. It's been said before... "The only stupid question is one that you don't ask"
Last edited by Amatikulu; 01-02-2011 at 08:32 AM.
-
Thank You to Son For This Useful Post:
-
Legacy Member
"You're traveling through another dimension, a dimension not only of sight and sound but of mind. A journey into a wondrous land whose boundaries are that of imagination. That's the signpost up ahead - your next stop, the Twilight Zone!"
Last edited by 5thBatt; 12-28-2010 at 01:50 AM.
-
Thank You to 5thBatt For This Useful Post:
-
Legacy Member
I tried, O' I tried.
Others have jumped in now.
Last edited by Amatikulu; 01-02-2011 at 08:32 AM.
Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...
-