The dent is almost gone!

**Rumpelhardt** · 03-07-2014 11:01 AM

I replaced the standard carbine buffer in my ar-15 with a H buffer and the little dent I used to get in the brass all but disappeared. I know that this dent didn't hurt anything but it just annoyed me a little.

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 03-07-2014 11:01 AM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**WarPig1976** · 03-07-2014 11:17 AM

Another reason I'm an AK man!!.....

**Rumpelhardt** · 03-07-2014 03:07 PM

An AK isn't worth reloading for so it wouldn't matter one way or another........................

**jmoore** · 03-10-2014 12:38 AM

In actual fact, there ARE AKs with firing pin springs to minimize primer impact. Was a particular problem with the first .223 AKs which also had the big f.p. tip diameter. "Kabooms" and blanked primer cups made for all sorts of drama.

Thread: The dent is almost gone!

Thread Tools

Search Thread

Display

The dent is almost gone!

Thank You to Rumpelhardt For This Useful Post:

Thank You to Rumpelhardt For This Useful Post:

Tags for this Thread

Posting Permissions