-
FREE MEMBER
NO Posting or PM's Allowed
1903a4 1-43 receiver / barrel code photos
Here are some photos of the 1-43 barrel and receiver outside of the stock. There is some difference in the machining and number of inspection stamps from later a4's. On this barrel there is no punch mark between the front sight grooves.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
04-19-2009 03:42 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
hi: just interested in the serial numbers of the o3-4 production and what is considered late and what numbers are early and what these rifles were stocked with, either scant or c stocks, thanks jay
-
-
FREE MEMBER
NO Posting or PM's Allowed
Both of these rifles have C stocks, the 340 sn gun is very early in production, the 7-43 341 sn rifle is mid production. I believe the 499 and Z sn rifles were considerd late. Some of the others more knowledgable than me may chime in on this one.
-
http://vishooter.home.att.net/ra_serialization.txt
The serialization chart on the above captioned site is the best one available. The author has attempted to account for scrapped receivers and to rationalize the upper limit of the "third s/n block" with the serial numbers of the rifles known to exist in the real world.
Ordnance placed two orders for A4's, one for 20,000 rifles and the second for 8,365. Production on the second order commenced before the first order was finished so for all intents and purposes it was one continuous process controlled primarily by the availability of scopes.
Specific serial number ranges for various rifle models were assigned by ordnance. When production on the second A4 order commenced using numbers starting at 4,000,001 (as instructed) Remington determined that regular A3 production had already run into that portion of the range. A leading "Z" was added to the serial of each of 3000~ duplicate A4 Receivers and a new block of serial numbers started at 4,992,001 to complete the reamainder of the second order. (NB A4 and A3 production was performed in separate areas of the Ilion plant. Also thoughout 1943 Remington was producing an average of 50,000~ A3's a month!)
On an otherwise original rifle barrel dates serve only as a general guide. Lower serial numbers will have earlier barrels. Things get less clear as you get toward the middle of the serial number range. The lack of scopes meant the rifles couldn't be finished, shipped and billed. Finally ordnance directed Remington to maintain an inventory of 1000 completed rifles on hand awaiting scopes (a month later the quantity was bumped to 2000). These instructions caused certain month's component production to increase dramatically (September barrels for example).
Springfield Arsenal sent several thousand "C" stocks for use on early rifles.
Thereafter M1903A1 ("sorta C") stocks were supplied mainly from contractors such as Keystone.
Scants started to appear on original rifles (in the first order) in the fall of 43.
Over time the use of scant stocks seemed to increase.
Regards,
Jim
-