-
Advisory Panel
removing a stuck front sight, base. tip of the week.
as we all know, these old battle rifles saw hard use, and sometimes, we need to remove a front sight base to remove bands, or just replace the front sight.
so i put together some pictures on how to cut one off that you cant get the pin off, or cant drive it off, do to rust or other,
first, use black tape, and tape ahead and behind the base,
second, use a cut off wheel with a dremill tool, set on low. cut the bottim side of the base,
note: dont cut all the way through like i did in the picture, just notch it.
thrid. remove the tape from the front of the base, and leave the tape behind the base.
with a brass or plastic head hammer WACK IT!!, one time should do it.
it will come right off.
remove the tape, and clean it up.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by Chuckindenver; 08-27-2009 at 12:21 PM.
-
The Following 4 Members Say Thank You to Chuckindenver For This Useful Post:
-
04-09-2009 05:43 PM
# ADS
Friends and Sponsors
-
Legacy Member
Thank you, Chuck. Very good tip.
-
-
-
Advisory Panel
im goint to try and put together weekly tips, from wood repair, to basic cleaning,
as long as i dont have a guy talking to me when i do these, ill likely not screw em up, like this pic show.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Hey Chuck,
When I saw your post thought that might be your intention. Great idea, by the way cleaning is spelled "cleanin" And you do take good pichers.
LB