-
Legacy Member
Waisted front sight protector on 1941 Long Branch
I just bought a 1941 Long Branch No 4 Mk I. The front sight protector looks like a normal LB one. Does anyone know what serial number approximately the waisted front sight protectors were on up until?
Does anyone have a LB marked waisted front sight protector they'd sell me?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
07-13-2007 12:06 PM
# ADS
Friends and Sponsors
-
Advisory Panel
Yeah, I need 2 myself....
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
Count me in for one as well. For my 1941 LB No4MK1
-
Here's an interesting (somewhat related) thread about an exercise in restoring a No.1 MkVI that also required a "waisted front sight protector". The owner had it built from scratch by Scott Stonehill, who also makes those special screws for Parker Hale sights if you ever need them.
Restoring a No.1 MkVI Enfield
Regards,
Badger
-
-
Advisory Panel
I suspect that Mk.I rifles that remained in service were retrofitted with standard pattern foresight protectors. It would seem that many, if not most surviving Mk.I rifles have the later pattern guards, and non-hinged bands as well. If a rifle does have a waisted guard, the question arises - is it the one originally on the rifle, or is it a restoration? Have never heard of a serial number cutoff when the waisted protctor was phased out.
Were Savage Mk.Is ever fitted with the waisted guards?
-
-
Advisory Panel
Anyone want to post a comparison pic of the waisted protector with the usual one?
-
-
Advisory Panel
Wish I could. My Mk.I got FR'd. Think along the lines of a P-14.
-
-
Advisory Panel
The Cdn parts manual (CFTO) shows them all. My camera is down right now, or I would show a pic, and my scanner hasn't worked in years.
-
-
Legacy Member
Last edited by Cantom; 07-15-2007 at 01:50 PM.
-
-
Advisory Panel
Remember that the troop trials Enfields had many parts which were unique only to those rifles, and many of their components cannot be described as typical to anything but the trials rifles. I had one of these (also converted to sniper) and it was not hard to see why they were supposed to be condemned...replacement parts were quite special.
One thing that was interesting on mine was that the cruciform bayonet (which was for the earlier production rifles) would not fir onto my trials rifle.
The Canadian parts manual shows the waisted type front sight base as the typical two part assembly. It does show a one piece type front sight base (non-waisted), but does not give a NSN, so I am not sure if it ever became anything more than a drawing.
-