-
Legacy Member
No.4 Mk1 wood
Hi All:
I've had this rifle sitting around for a while, until I got a few other projects out of the way.
For starters, what is going on with the wood here? The butt stock is walnut, the handguard is beech, but what is the forend? It's very dark, almost black in color. This rifle has been completely cleaned, and has no stain; it only has a light coat of BLO as of these photos.
I've ready many, many posts about color matching, staining, oil finishes, etc. I was just going to stain the handguard in walnut, and then finish everything with velvit oil. I'd like to get a red tint, so it's closer to what I started with.
Any thoughts? Thanks in advance.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
11-16-2020 08:09 PM
# ADS
Friends and Sponsors
-
Advisory Panel
Looks like the tip of an Ishapore screw at the front of the mag well, is it? The markings make it Ishapore too, so I suspect the forestock is likely Mahogany. It looks like it too. No chance of making it lighter color. As for color matching, I think the directive was "If possible" and many places simply didn't have enough replacements that matched. Besides, for a service rifle it doesn't really matter.
If you want the reddish tint, you'll need to start with fresh wood.
-
The Following 2 Members Say Thank You to browningautorifle For This Useful Post:
-
-
Contributing Member
It might just be oil blacked Walnut Jim, I've a forend from a similar ex Indian No4, with the typical Ishapore screw and that is black as night on outside, normal colour inside....
I would photograph it if I could remember we're the hell I put it!
It has to be said, many of these ex Indian No4/5 rifles are 'very' well used.
So do please check carefully before shooting.
Last edited by mrclark303; 11-19-2020 at 04:44 AM.
-
Thank You to mrclark303 For This Useful Post:
-
Advisory Panel
Originally Posted by
mrclark303
It might just be oil blacked Walnut Jim
I suppose, it could...but I'd be able to tell better after handling it. He says it's clean so I must guess it's free of oil. A complete look at this one might help. Maybe...he will... The grain doesn't look the same as the butt which is definitely walnut. Looks like Mahogany.
-
Thank You to browningautorifle For This Useful Post:
-
Legacy Member
I suppose, it could...but I'd be able to tell better after handling it. He says it's clean so I must guess it's free of oil. A complete look at this one might help. Maybe...he will... The grain doesn't look the same as the butt which is definitely walnut. Looks like Mahogany.
The butt is definitely walnut; the forend is a straight grain wood like Mahogany, but doesn't have the same tint or take up BLO the same way. The forend was actually close to the color of walnut un-oiled, but with a light hand rubbed coat of BLO, it went almost black. It was so, so, so dirty when I got it, i went straight to oven cleaner and saran wrap - so it was cleaned to the point I was concerned about it cracking from drying out. I'll see if I can't post a few better pics.
Thanks!
-
Thank You to mrandig For This Useful Post:
-
Advisory Panel
A photo of the barrel channel would be helpful, as you are likely to find a more natural wood surface there.
-
The Following 2 Members Say Thank You to Patrick Chadwick For This Useful Post:
-
Legacy Member
Took me a few days to respond - I've got a couple projects going.
I just popped out the trigger assembly and the magazine. Looking into the magazine well, I'm going to have to go with Jim - looks like Mahogany?
I did add a little brown dye to darken the beech handguards - there's the red I was looking for!
Attachment 112865Attachment 112866
Last edited by mrandig; 11-29-2020 at 10:43 PM.
-
Thank You to mrandig For This Useful Post:
-
Advisory Panel
Originally Posted by
mrandig
looks like Mahogany
They use the wood they have on hand...for this. They made Mahogany stocks and forestocks, pistol grips for their FN rifles too. They were just terrible, showed every thumbnail scratch. Also because they're soft, they made them thick.
-
Thank You to browningautorifle For This Useful Post:
-
Legacy Member
Originally Posted by
mrclark303
It has to be said, many of these ex Indian No4/5 rifles are 'very' well used.
So do please check carefully before shooting.
Spent a long time trying to clean tonight. I don't think I've ever seen so much fouling in a barrel. Were these never cleaned in the field?
Attachment 113055
-
-
Advisory Panel
It's more like an individual issue. Didn't they take care of their rifles completely...doesn't look like it nor do the other examples I've seen.
-