I took my Inglis High Power out of the safe for the first time in a decade. At the range I had a couple of malfunctions.

3 or 4 times while firing 200 shots, the hammer fell to the half cock notch instead of all the way. One way to clear this malfunction was to cock the hammer, and cycle the safety. Just recocking did not clear the malfunction.

My assumption is that even though the pistol looks quite clean, there is some crud in the hammer - sear mechanism. I will be detail stripping, cleaning and reassembling when I get a chance.

Does anyone have some words of wisdom?
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.