-
FREE MEMBER
NO Posting or PM's Allowed
Dies for .45 Long Colt
An Internet search provided contradictory information on whether one could load .45 LC rounds using .45 ACP dies. It appears that is is possible and in fact is done by many reloaders. Does someone here have specific knowledge about the correct procedure to load .45 LC rounds using .45 ACP dies? I would appreciate some assistance on this issue.. Thanks in advance. --Regards
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
08-03-2014 11:16 AM
# ADS
Friends and Sponsors
-
Advisory Panel
The 45 ACP dies will work just fine. I've done it and at the time used 225 gr cast bullets destined to be 45 ACP ammo. It worked just fine.
-
-
-
Legacy Member
I have .45 LC and .45 ACP dies but, I wind up using the ACP dies for both since they are carbide and do a better job of sizing. If I were loading .454 diameter bullets I would worry about it but, I shoot .452 so, no problems.
Al
“Any society that would give up a little liberty to gain a little security will deserve neither and lose both.”- Benjamin Franklin
-