+ Reply to Thread
Results 1 to 8 of 8

Thread: "New" 96/11's

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    07-15-2024 @ 09:25 PM
    Location
    Land of the Free
    Age
    70
    Posts
    1,014
    Local Date
    10-31-2024
    Local Time
    05:30 PM

    "New" 96/11's

    Glommed these two 96/11's today on an on-line auction.







    Description stated:
    Schmidt-Rubin Model 1896/11 Straight-Pull Rifle, #313237, 7.5x55mm Swissicon, 30.7'' barrel, tangent leaf sight graduated to 2000 meters, blue finish, European walnut stocks, with sling. Import marked. Condition is very good retaining approx. 94% original factory blue. Stock with thinning to finish and light to just moderate dings, scuffs and scratches. Action is crisp, bore is very good and should clean to better.

    ---------- Post added at 09:45 PM ---------- Previous post was at 09:44 PM ----------

    The second one :







    Description advised:
    Schmidt-Rubin Model 1896/11 Straight-Pull Rifle, #229113, 7.5x55mm Swiss, 30.7'' barrel, tangent leaf sight graduated to 2000 meters, blue finish, European walnut stocks, with sling. Import marked. Condition is very good retaining approx. 95% original factory blue. Stock with thinning to finish and light to just moderate dings, scuffs and scratches. Action is crisp, bore is bright.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    11-01-2024
    Local Time
    02:30 AM
    Quote Originally Posted by Calfed View Post
    Action is crisp, bore is very good and should clean to better.

    What always irritates me about such texts as " Should clean to better" is: why didn't the seller clean it himself? I have a nasty suspicious mind about auction texts, and a "should" means that the seller is providing hope, not facts. If I sell a rifle, you may be sure that the bore is as clean as anyone is ever going to get it without recutting the rifling, I would not have kept it in a dirty condition, neither did the Swissicon.

    Likewise the favorite auctioneer's description "dark bore". If a bore is dark, it is either because the seller is bone idle (bad indication for the general condition of the rifle) and the bore is filthy, or it is rusted (even worse). Why are sellers so lazy - or devious?

    Please forgive me my little rant. I think you have got two good rifles, and the bores really will clean up "to better". The typical Schmidt Rubin has an excellent bore, and will outshoot most other milsurps with open sights.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    07-15-2024 @ 09:25 PM
    Location
    Land of the Free
    Age
    70
    Posts
    1,014
    Local Date
    10-31-2024
    Local Time
    05:30 PM
    Thread Starter
    This was one of those 500 gun auctions and I'm assuming that the auction company really didn't care to clean the weapons. My guess..the late owner didn't clean it after he last fired it and it will clean up fine.

    I've always had good luck with this auction house and will post some bore pics after I've cleaned it up.

    I bought 10 Swissicon rifles from this auction house last year...combination of K31, K11. 1911 and 96/11's. All were "as described" or better.

    I'll post bore pics after they arrive.

  6. #4
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 04:29 PM
    Location
    Pennsylvania, United States
    Posts
    7,276
    Real Name
    Steve
    Local Date
    10-31-2024
    Local Time
    08:30 PM
    You must be a serious Swissicon collector. I'm happy with one of each type. They have become my favorites and I can see how the potential to want more will be hard for me to withstand. I think I'll try to get the earlier models first. I have a 1911, K11 and K31.

  7. #5
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    07-15-2024 @ 09:25 PM
    Location
    Land of the Free
    Age
    70
    Posts
    1,014
    Local Date
    10-31-2024
    Local Time
    05:30 PM
    Thread Starter
    No question...I love Swissicon rifles.

    Here are the ones I got from this auction last year...










  8. #6
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    07-15-2024 @ 09:25 PM
    Location
    Land of the Free
    Age
    70
    Posts
    1,014
    Local Date
    10-31-2024
    Local Time
    05:30 PM
    Thread Starter
    The 96/11's came last week and I got a chance to look them over before they went into my FFl's safe for the 10 day "cooling off" period.

    I made a few observations...

    triggers on both are simply amazing...as are all my Swissicon rifles.

    The bore of #229113 is one of the best I've seen. I also noticed something that was clearly visible in the auctions pics...the serial number on the barrel appears to be handstamped and there is no M+ final acceptance stamp on the barrel shank. This appears to indicate a barrel replacement sometime after the 96/11 conversion. That may account for the fine bore.



    The bore of #323237 had a light coat of grease. This made it appear to be less then perfect. A couple of passes with the bore snake revealed to true excellence of the bore.

    Range report when I can get them to the range

  9. #7
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    07-15-2024 @ 09:25 PM
    Location
    Land of the Free
    Age
    70
    Posts
    1,014
    Local Date
    10-31-2024
    Local Time
    05:30 PM
    Thread Starter
    Quote Originally Posted by Patrick Chadwick View Post
    What always irritates me about such texts as " Should clean to better" is: why didn't the seller clean it himself? I have a nasty suspicious mind about auction texts, and a "should" means that the seller is providing hope, not facts. If I sell a rifle, you may be sure that the bore is as clean as anyone is ever going to get it without recutting the rifling, I would not have kept it in a dirty condition, neither did the Swissicon.

    Likewise the favorite auctioneer's description "dark bore". If a bore is dark, it is either because the seller is bone idle (bad indication for the general condition of the rifle) and the bore is filthy, or it is rusted (even worse). Why are sellers so lazy - or devious?

    Please forgive me my little rant. I think you have got two good rifles, and the bores really will clean up "to better". The typical Schmidt Rubin has an excellent bore, and will outshoot most other milsurps with open sights.
    Turned out to be grease in the barrel. The Swiss owner probably left it as he was trained...with a light coat of grease and the auction house didn't feel like cleaning it out. Both bores were excellent.

    I was able to pick up my new Swiss rifles this morning and got a couple of close ups of the metal and wood. One of them appears to have had a barrel replacement at one time. That one also has an odd, shield-shaped stamping on the tang. Bores on all of them are superb...of course.

    Here is a better shot of the serial number on the barrel:


    Appears to be a handstamping.

    Here is a stamping on the tang:


    It appears to be an "H" or something similar

    There is a large circle "B" on the butt of the stock


    Bore is excellent!

  10. #8
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    07-15-2024 @ 09:25 PM
    Location
    Land of the Free
    Age
    70
    Posts
    1,014
    Local Date
    10-31-2024
    Local Time
    05:30 PM
    Thread Starter
    I got a quick trip to the Lincoln range in yesterday and shot the newest Swissicon and Swede rifles.

    96/11 #229113 ...the one with the replacement barrel is a smoking hot shooter.

    After verifying that the front sight was set correctly for windage @ 50 yards, I tried a few 5 shot groups @ 100 yards.

    The first one with GP11...


    It looked pretty good, so I tried a second GP11 group...


    I really liked these groups, so I tried a group with my handload...43.9 grains of IMR4064 and a 168 gr AMAX...


    I think this is my new favorite Swiss rifle.

    ---------- Post added at 08:45 PM ---------- Previous post was at 08:39 PM ----------

    96/11 #313237 was a bit of a disappointment. The best GP11 group that I could muster @ 100 yards was this one...



    I didn't have anymore of my reloads, so I wasn't able to try them in this one. A little odd, because this bore looks to be at least as good as the bore in the other 96/11. I guess it could be an issue unrelated to the bore. I may take it apart and make sure there isn't something in the barrel channel, etc that is interfering with the accuracy.
    Last edited by Calfed; 08-30-2012 at 11:45 PM.

+ Reply to Thread

Similar Threads

  1. Replies: 6
    Last Post: 02-09-2011, 10:15 AM
  2. New big fonts and "buttons" interfering with each other on "Mobile" setting
    By jmoore in forum Q&A - VBBS Bulletin Board Software
    Replies: 17
    Last Post: 01-07-2011, 05:11 AM
  3. SAVAGE "S" in details, "ILCO butt trap", "P" on bayonet stud,what co. was ILCO?
    By Garandrew in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 11-15-2010, 07:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts