+ Reply to Thread
Results 1 to 9 of 9

Thread: New "sneak" M39

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    Yesterday @ 03:22 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    05-25-2024
    Local Time
    05:19 AM

    New "sneak" M39

    I recently snagged this 1970 "sneak" (I know, I know...there is nothing sneaky about these) M39's.




    It is in great shape, bore is fine, a few scratches on the stock.

    There is a number that I can't identify on the side of the receiver.."34562"


    Anyone able to identify that?

    What is the story on these late date M39's? What were they used for?

    Thanks
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Mohawk's Avatar
    Join Date
    Dec 2010
    Last On
    08-01-2011 @ 02:15 AM
    Location
    Western US
    Posts
    148
    Local Date
    05-25-2024
    Local Time
    05:19 AM
    They had some extra parts laying around and assembled them. Nice looking M39. Check on the 7.62x54r website. It explains about "sneaks" Number on side of receiver is the Number assigned to it by Century, for the importation paperwork. Most Mosins had no serial number on the receiver, only on the barrel. The Firearms act of 1968 requires all firearms in this country to have a serial number on the receiver. Europe sees the barrel as the gun, we see the receiver as the gun...

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    Yesterday @ 03:22 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    05-25-2024
    Local Time
    05:19 AM
    Thread Starter
    Quote Originally Posted by Mohawk View Post
    They had some extra parts laying around and assembled them. Nice looking M39. Check on the 7.62x54r website. It explains about "sneaks" Number on side of receiver is the Number assigned to it by Century, for the importation paperwork. Most Mosins had no serial number on the receiver, only on the barrel. The Firearms act of 1968 requires all firearms in this country to have a serial number on the receiver. Europe sees the barrel as the gun, we see the receiver as the gun...
    Thanks, Mohawk

    I do not think the numbers on the side of the receiver were put there by the importer. Pretty much every import number that I've seen on these Finn Mosins was of the "dot-matrix" style of EP'ing. Mine has one of those numbers on the top of the receiver (ugh!) and it matches the serial on the barrel. I believe that the importer's number had to match the existing s/n, if there was a s/n present.


    After thinking about the number a bit more, I think that it may be a serial number that was put on by the Finns and when the 1970 barrel was mounted, they re-used this receiver, which had previously been mounted with a differently number barrel.

    I started going back through some of my other Finn Mosins. A few, not all, by any stretch, have numbers in the same place as this one. The numerals on these other Mosins are similar style and font, but match the s/n on the barrel.

    This is one of my Finn M91's.


    You can see some numerals in pretty much the same place as the ones on my new "sneak". That number matches the s/n on the barrel.

    This is one of my other Finn M39's.


    If you squint, you can see a number on the side of the receiver in the same spot as my new "sneak". That number also matches the s/n on the barrel.

    However, this is one of my Finn 91/30's.



    It has no number on the receiver and the only import mark, a Samco, is on the bottom of the barrel near the muzzle. The Samco import mark has no numbers.

    While I have my suspicions about who put the stamped numbers on the receiver and why, I don't know for sure and I guess it is still an open question.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Teleoceras's Avatar
    Join Date
    Mar 2009
    Last On
    04-04-2023 @ 11:01 PM
    Location
    New York
    Posts
    46
    Local Date
    05-25-2024
    Local Time
    08:19 AM
    Very nice M39! You're lucky that the old Imperial Eagle wasn't ground off!

    By any chance did you look under the receiver tang to see where and when the receiver was built?

  7. #5
    Legacy Member kar98k's Avatar
    Join Date
    Oct 2009
    Last On
    02-13-2021 @ 05:50 PM
    Location
    PHX
    Posts
    327
    Local Date
    05-25-2024
    Local Time
    07:19 AM
    M39's were built on captured Russianicon receivers. 34562 was the original serial number for that Russian rifle before it was captured by the Finns and turned into the M39

  8. #6
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    Yesterday @ 03:22 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    05-25-2024
    Local Time
    05:19 AM
    Thread Starter
    Quote Originally Posted by Teleoceras View Post
    Very nice M39! You're lucky that the old Imperial Eagle wasn't ground off!

    By any chance did you look under the receiver tang to see where and when the receiver was built?
    Many of my Finn Mosins have had the Imperial eagle ground off. They have a small round depression where the eagle was. I got lucky on this one. I haven't taken the receiver out of the stock. I kinda hate doing that, because it can disturb the shims that the Finns put in to help with the bedding.

    ---------- Post added at 06:42 PM ---------- Previous post was at 06:34 PM ----------

    Quote Originally Posted by kar98k View Post
    M39's were built on captured Russianicon receivers. 34562 was the original serial number for that Russian rifle before it was captured by the Finns and turned into the M39
    I'm not sure about that. I do not recall ever seeing Russian Mosins with serial numbers in that location or with that style of numerals. Also, I have too many Finn Mosins that do have a number in that location and it seems to match the Finnishicon s/n that is present on the barrel shank. If that was a serial number applied by the Soviets, how would it match the Finnish serial number from the barrel shank?

    I'm still betting that the receiver on my new "sneak" was once mated to a Finnish barrel with the s/n "34562" on the shank and was recycled in 1970 when they put the current barrel on.

    However...that is still just a guess.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Teleoceras's Avatar
    Join Date
    Mar 2009
    Last On
    04-04-2023 @ 11:01 PM
    Location
    New York
    Posts
    46
    Local Date
    05-25-2024
    Local Time
    08:19 AM
    Quote Originally Posted by Calfed View Post
    Many of my Finn Mosins have had the Imperial eagle ground off. They have a small round depression where the eagle was. I got lucky on this one. I haven't taken the receiver out of the stock. I kinda hate doing that, because it can disturb the shims that the Finns put in to help with the bedding.[COLOR="Silver"]
    Yeah, I have two M39's and a Finnishicon M91 and all of them have the Imperial Eagle ground off.

    I can understand about the shims. I only know that one of my M39's receivers was made at Tula in 1896 when I bought her since she was considered an antique when listed. I haven't looked under the tangs of my other two Finns either.

  10. #8
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    Yesterday @ 03:22 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    05-25-2024
    Local Time
    05:19 AM
    Thread Starter
    I finally got to the range and fired a few rounds through this beauty. The first rounds were a bit disappointing...

    (Prvi 182 gr FMJBT @ 100 yards)


    About 3 MOA, which is not particularly noteworthy for a Finn. However, I've noted in the past that my other M39's like the barrel bands snug, so I checked all the screws...the front action screw took about 1/2 turn and the lower band screw took about a turn and 1/2. Fired three more of the Prvi's and got this


    Anyone else noted that M39's like the barrel bands tight?

  11. Thank You to Calfed For This Useful Post:


  12. #9
    Legacy Member Calfed's Avatar
    Join Date
    Oct 2007
    Last On
    Yesterday @ 03:22 PM
    Location
    Land of the Free
    Age
    69
    Posts
    1,014
    Local Date
    05-25-2024
    Local Time
    05:19 AM
    Thread Starter
    I got to the range last week with some of the Prvi 54R "match" ammo and some of the "regular" 54R ammo. I have to admit the M39 liked the "match" ammo better than the regular...was a bit of surprise how bad the group for the regular ammo was after the results above. Both groups shot at 100 yards

    .........The "match" ammo.............................................. .



    The "regular" ammo

+ Reply to Thread

Similar Threads

  1. Replies: 6
    Last Post: 02-09-2011, 10:15 AM
  2. New big fonts and "buttons" interfering with each other on "Mobile" setting
    By jmoore in forum Q&A - VBBS Bulletin Board Software
    Replies: 17
    Last Post: 01-07-2011, 05:11 AM
  3. SAVAGE "S" in details, "ILCO butt trap", "P" on bayonet stud,what co. was ILCO?
    By Garandrew in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 11-15-2010, 07:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts