-
Legacy Member
M4 Bayonet question
I'd appreciate opinions regarding a Case M4 bayonet I'm looking at. Does the blade shape/configuration look correct? Top of the blade seems to be cut a bit different than my other M4s....at least from what the pics show.
Thanks for any input.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
12-10-2009 12:57 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
M4 bayonet
Kikokat- Looks good to me.If you're talking about the back-cut on the top edge of the blade. Most M4's and M3's are ground that way. Now, I have seen Utica M3's with the back-cut w/ less of a curve, which sometimes gets hung up when you put it in an M8 scabbard. SKIP
-
-
Legacy Member
Thanks, Skip. That's what I was referring to. It seemed to have a bit more radical "cut" to the back cut on top than my others. I did wonder if perhaps the photo/lighting may have accentuated that look.
Appreciate your input.
John
-
-
Looks good. Square cut and no plastic spacers.
What is the blade length? That might let you know if it had been reground, then reparked.
-
-
Legacy Member
Good question Jim. I'll have to find out.
Thanks!
-