-
Legacy Member
Winchester 94 help and hunting pics!
Went hunting today, and it turned out to be one of my most interesting hunts yet. A landowner near my house asked me to exterminate hogs which were destroying his property's making it difficult to sell. I was hunting with my grandfathers Winchester Model 94 30-30, when a 150yds out I spotted a large hog. I took a shot, hit it in the head, and dropped it. Well as I went to examine it, half way there another hog burst from a hole no more than 5m from me, so I swung one handed and shot it point blank in the head.
Attachment 49668
Now the problem, I never paid attention before, but it seems that there used to be a stake in the hand guard, which now seems to be missing. But on the opposite end there is still something in there. The hand guard now moves when medium pressure is applied.
Attachment 49666
Attachment 49667
Can someone post pics of what it should look like, and how to fix it?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
02-06-2014 10:00 PM
# ADS
Friends and Sponsors
-
Legacy Member
The band screw has broken off leaving part of the threads stuck in the band on the opposite side. Replacement screws are available at Numrich Gun Parts for around $3.50. The real challenge could be getting the rest of the screw out of the band, especially if it's seized and enough remains to prevent the band from being removed for easier access.
You did a good job on those porkers. Should be some fine eating.
-
Thank You to vintage hunter For This Useful Post:
-
-
Advisory Panel
He'll know quick enough if the band moves. If not then strip the whole affair off by sliding it forward as you strip the front. Front band first and then mag tube. Then you should be able to just roll the band off the forestock. Let us know...
-
-
Legacy Member
Just ordered a new screw, thanks a ton guys! I'll let you know it goes!
-
-
FREE MEMBER
NO Posting or PM's Allowed
Originally Posted by
garrettbragg12
Just ordered a new screw, thanks a ton guys! I'll let you know it goes!
Did you get the rest of the screw out ?